KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 30, 2025, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (7/30/2025) - BSMITH

Trade Name: Shur-Flex Surface Mount Delineator (SF0140)


Generic Name:
This product is Patented

Manufacturer: Shur-Tite
Address: 1920 N. Weaver St.
	Gainsville, TX 76240

Background description of company and its products:
	SHUR-TITE® Products manufactures highway safety products for use on the modern highway systems. Recycling innovation and labor sensitive design are paramount to the production of our environmentally friendly products.
Recommended Uses-Primary: Miscellaneous
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	Enhance quality, improve safety and save money with the Shur-Tite multiple-hit, self-righting, post that can be replaced in less than a minute. By minimizing change-outs, our products increase safety conditions for the CDOT employees by limiting their exposure to hazardous traffic.
General Composition of Material:
	Shur-Flex Surface Mount Delineators utilize a three-component design consisting of a thermoplastic base (7”x7”, 7”x10” or slope mount 7”x10”), a flexible square to round joint (urethane) and a high density thermoplastic post (2.25” OD and post heights 18” to 48”). Posts have premium UV added and can be ordered round top or flat top.
Date introduced on Market: 2004-04-05
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided



This product meets requirements of following specifications:
	AASHTO: TTCD-01-005 ASTM: 4956 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	AL, AZ, CA, FL, GA, ID, LA, ME, MD, MA, MI, MN, NV, NE
This product is approved for use by other highway authorities or other agencies:

No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://shur-tite.com/surfacemount

This information is filed by Jasleene Garcia on Jul 28, 2025
Contact Information:
	Shur-Tite
	1920 N. Weaver St.
	Gainsville, TX 76240
	Phone: 5122189500
	Email: jasleene@shur-tite.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
CDOT Form 595 (Shur-Tite Surface Mount Delineator).pdf	application/pdf	2396	1367 Jasleene Garcia	Shur-Tite	Jul 28, 2025	7123	Yes
EW7C36WP3 White Shur-Flex Surface Mount .pdf	application/pdf	235	1367 Jasleene Garcia	Shur-Tite	Jul 28, 2025	7127	Yes
PNA Delineator Posts MSDS.pdf	application/pdf	489	1367 Jasleene Garcia	Shur-Tite	Jul 28, 2025	7125	Yes
SDS from PNA.pdf	application/pdf	139	1367 Jasleene Garcia	Shur-Tite	Jul 28, 2025	7124	Yes
Shur-Flex Orange 36 in Surface Mount.pdf	application/pdf	34	1367 Jasleene Garcia	Shur-Tite	Jul 28, 2025	7128	Yes
Shur-Flex Surface Mount NTPEP Test TTCD-2015-01-005.pdf	application/pdf	675	1367 Jasleene Garcia	Shur-Tite	Jul 28, 2025	7126	Yes

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.