KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 09, 2025, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (7/9/2025) - BSMITH

Trade Name: CET™


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
2025-07-08 KY Cover Letter - CET.pdf	application/pdf	384	934 Paul Kruse	Valtir, LLC	Jul 08, 2025	7094	Yes
Drawing CET and CASS S3 SS2383 Rev- 2025-06.pdf	application/pdf	462	934 Paul Kruse	Valtir, LLC	Jul 08, 2025	7096	Yes
PI Sheet CET 2025-05.pdf	application/pdf	1065	934 Paul Kruse	Valtir, LLC	Jul 08, 2025	7095	Yes
Product Manual CASS S3 and CET Rev- 2025-05.pdf	application/pdf	7689	934 Paul Kruse	Valtir, LLC	Jul 08, 2025	7097	Yes
SDS_Carbon Steels_04-28-2020.pdf	application/pdf	117	978 Buan Smith	KYTC Division of Materials	Jul 09, 2025	7099	Yes
SDS_Zinc-Aluminum-Lead Alloys_01-16-2019.pdf	application/pdf	260	978 Buan Smith	KYTC Division of Materials	Jul 09, 2025	7100	Yes
Warranty Language.pdf	application/pdf	70	934 Paul Kruse	Valtir, LLC	Jul 08, 2025	7098	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

The Kentucky Transportation Cabinet	885 Dorian Brawner Agency	U Undecided	Being designed for the CASS S3 M10 system currently in Phase 10, the product seems beneficial, but would defer to design for confirmation of that.	Jul 22, 2025	3475

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name:
This product is Applied for Patent

Manufacturer: Valtir, LLC
Address: 15601 Dallas Parkway, Suite 525
	Addison, TX 75001

Background description of company and its products:
	Manufacturer of highway products, including cable barrier systems. MASH 2016 TL-3 tested tangent, redirective/gating cable end terminal for use with Valtir’s CASS® S3 cable barrier.
Recommended Uses-Primary: Barriers, Fencing and Roadside Structures
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	MASH tested for use with CASS S3 M10 (TL3/TL4) cable barrier system. CASS S3 M10 currently Phase 10 in KyPEL.
General Composition of Material:
	Primarily galvanized steel
Date introduced on Market: 2025-05-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided



This product meets requirements of following specifications:
	AASHTO: MASH 2016 ASTM: Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	New to market, being submitted to select states for review concurrently.
This product is approved for use by other highway authorities or other agencies:
	None. New to market.
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://www.valtir.com/product/cass-s3-m10-new/

This information is filed by Paul Kruse on Jul 08, 2025
Contact Information:
	Valtir, LLC
	3617 Cincinnati Avenue
	Rocklin, CA 95765
	Phone: 916-644-9102
	Email: paul.kruse@valtir.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.