KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Dec 12, 2024, its status is phase 13.

Notes:

Product has been sent to the New Products Review Committee (11/18/2024) - BSMITH The following is the recommendation/comment from the Review Committee. "Planibond AE Fast is not approved as Type IV or Type V. It is not approved as Type IV because (1) we received a sample but it was not injectable, (2) the gel time does not meet the minimum, and (3) the data is missing tensile strength and elongation at break. This material is not approved as a Type V because (1) it does not meet gel time and (2) it is missing data for tensile strength and elongation at break." (12/12/2024) - BSMITH

Trade Name: Planibond AE Fast


Generic Name:
This product is Not Patented

Manufacturer: Mapei Corporation
Address: 1144 E. Newport Center Drive
	Deerfield Beach, FL 33442

Background description of company and its products:
	Planibond AE Fast is a rapid-setting, high-strength, moisture-tolerant, two-component, 100%-solids, epoxy anchoring gel designed for a wide variety of vertical/horizontal bonding and repair applications
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	? Rapid-setting, nonsag gel consistency ? High-modulus and high-strength ? Moisture-tolerant ? 100%-solids and solvent-free with zero VOC content ? Available in easy-to-use, dual cartridges
General Composition of Material:
	Rapid-Setting, High-Strength, Epoxy Anchoring Gel
Date introduced on Market: 2020-01-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C881 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	AZ
This product is approved for use by other highway authorities or other agencies:
	ID, KS, UT, TX, NJ, ME
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://www.mapei.com/us/en-us/products-and-solutions/products/detail/planibond-

This information is filed by Luis Falaschi on Nov 15, 2024
Contact Information:
	Mapei Corporation
	1144 E. Newport Center Drive
	Deerfield Beach, FL 33442
	Phone: 9547986692
	Email: lfalaschi@mapei.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

NELSON - Mapei - 18-1112 - 9-13-18 - Planibond AE Fast.pdf	application/pdf	1150	1240 Luis Falaschi	Mapei Corporation	Nov 15, 2024	6868	Yes
Planibond AE FAST TDS.pdf	application/pdf	5202	1240 Luis Falaschi	Mapei Corporation	Nov 15, 2024	6867	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	N Disapprove	Planibond AE Fast is not approved as Type IV or Type V. It is not approved as Type IV because (1) we received a sample but it was not injectable, (2) the gel time does not meet the minimum, and (3) the data is missing tensile strength and elongation at break. This material is not approved as a Type V because (1) it does not meet gel time and (2) it is missing data for tensile strength and elongation at break.	Dec 10, 2024	3415
KYTC	567 Brandi Mitchell Agency	N Disapprove	Planibond AE Fast is not approved as Type IV or Type V. It is not approved as Type IV because (1) we received a sample but it was not injectable, (2) the gel time does not meet the minimum, (3) the data is missing tensile strength and elongation at break. This material is not approved as a Type V because (1) it does not meet gel time and (2) it is missing data for tensile strength and elongation at break.	Dec 10, 2024	3414

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.