KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of May 23, 2024, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (5/23/2024) - BSMITH

Trade Name: AP Fill 720


Generic Name: AP Fill 720
This product is Not Patented

Manufacturer: Alchatek
Address: 4508 Bibb Blvd., Suite B5
	Tucker, Georgia 30084

Background description of company and its products:
	Alchatek offers eco-friendly polyurethane resins for construction, specializing in soil stabilization, concrete lifting, and water sealing. Their phthalate-free products, certified for water contact, serve the continental U.S. with robust support.
Recommended Uses-Primary: Unknown
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	"Very low viscosity, water impermeable, adjustable set time – as fast as 22 seconds, injected as a single component, phthalate free, certified by ALS Global to NSF/ANSI/CAN 61. Uses include filling voids behind concrete structures, cutting off high flow leaks, cutting off underground water flows, stabilizing soil, and seawall repair."
General Composition of Material:
	See Safety Data Sheet.
Date introduced on Market: 2017-01-01
Alternate for Following Existing Product: N/A
Cost Per Unit Material (F.O.B.): $49.94
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 10 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: N/A ASTM: D4878-98 (Viscosity), C-39 (Compr Fed. Spec.: N/A KY: N/A Others: N/A
This product has/is being evaluated by following Highway authorities or agencies:
	N/A
This product is approved for use by other highway authorities or other agencies:
	N/A
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: N/A Contact Date:

Product Web Page: https://alchatek.com/

This information is filed by Landon Feese on May 23, 2024
Contact Information:
	Alchatek
	4508 Bibb Blvd., Suite B5
	Tucker, Georgia 30084
	Phone: 404-618-0438
	Email: engineering@alchatek.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
AP Fill 720 - TDS.pdf	application/pdf	81	1300 Landon Feese	Alchatek	May 23, 2024	6665	Yes
AP Fill 720 AT-Case-Study-Stabilizing-a-Failing-Pond-Spillway.pdf	application/pdf	641	1300 Landon Feese	Alchatek	May 23, 2024	6666	Yes
AP-Fill-720-SDS.pdf	application/pdf	109	1300 Landon Feese	Alchatek	May 23, 2024	6667	Yes
Installation-Instructions-AT-Procedures-Standard-Application-For-Injecting-Cracks-and-Joints.pdf	application/pdf	719	1300 Landon Feese	Alchatek	May 23, 2024	6669	Yes
Product Literature Geotech.pdf	application/pdf	4865	1300 Landon Feese	Alchatek	May 23, 2024	6668	Yes

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us