KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 19, 2024, its status is phase 13.

Notes:

Additional information about the product is required for evaluation. Please log into KyPEL and under the Attachment tab of the submitted product add technical, safety data and any third party or NTPEP test results for the product. (3/29/2024) - BSMITH Product has been sent to the New Products Review Committee (3/29/2024) - BSMITH This product is being rejected at this time. Three-year test data is required for this product. Please resubmit when the three-year test data is completed and posted on Product Evaluation and Audit Solution's DataMine. (8/19/2024) - BSMITH

Trade Name: ALTERRA


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
Alterra B 060114 Part B SDS Revision 2 Version 3 New Address.pdf	application/pdf	278	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Mar 29, 2024	6585	Yes
Alterra HFST PDS .pdf	application/pdf	201	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Mar 29, 2024	6584	Yes
Alterra Part A SDS 09152014 New Address.pdf	application/pdf	263	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Mar 29, 2024	6586	Yes
Report HFTO-2021-01-002 P3 Infrastructure Inc. Alterra HFST Year Two Page 33.pdf	application/pdf	54	978 Buan Smith	KYTC Division of Materials	Mar 29, 2024	6592	Yes
Report HFTO-2021-01-002 P3 Infrastructure Inc. Alterra HFST Year Two Page 61.pdf	application/pdf	116	978 Buan Smith	KYTC Division of Materials	Mar 29, 2024	6593	Yes
Report HFTO-2021-01-002 P3 Infrastructure, Inc. Alterra HFST Year Three Asphalt.pdf	application/pdf	131	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	May 08, 2025	7038	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	N Disapprove	This product does not have AASHTO Product Evaluation and Audit Solutions (formerly NTPEP) data. The manufacturer's representative has been asked to re-submit the product when testing has been completed. Product was re-evaluated after 3 year testing completed on May 12, 2025. The product does not meet the 75 minimum skid testing requirement on the asphalt or concrete test deck. The asphalt 3 year data came in at 74.2 and the concrete test deck tested at 72.2.	May 12, 2025	3458
KYTC	567 Brandi Mitchell Agency	N Disapprove	This product does not have AASHTO Product Evaluation and Audit Solutions (formerly NTPEP) data. The manufacturer's representative has been asked to re-submit the product when testing has been completed.	Aug 19, 2024	3373
KyTC Maintenance	1183 Dora Alexander Agency	U Undecided	Seems like it's more for Pavements than bridges. In Bridge Preservation, any product we'd put on the bridge deck would look towards sealing and preserving the bridge deck first. Not sure if this product can be used on top of those bridge sealers.	Apr 01, 2024	3325

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name:
This product is Not Patented

Manufacturer: P3 INFRASTRUCTURE, INC.
Address: 671 MCCAULEY RD.
	STOW, OH 44224

Background description of company and its products:
	ALTERRA™ is a 100% solids, polymer resin binder to provide a durable driving surface with sustained friction resistance when used with specified aggregates. ALTERRA™ may be applied on concrete, asphalt, steel, FRP composite and timber surfaces
Recommended Uses-Primary: Skid Control Systems
Recommended Uses-Alternate: Unknown
Outstanding Features or Advantages Claimed:
	May be used as a resin binder layer for single or multiple layer broadcast aggregate system on variety of substrates as a High Friction Surfacing Treatment. May also be used as slurry or polymer concrete in varying thickness depending on use and exposure.
General Composition of Material:
	THERMOSETTING POLYMER BINDER
Date introduced on Market: 2014-04-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $25.00
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: HFST ASTM: Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	NTPEP
This product is approved for use by other highway authorities or other agencies:
	TN, NC, PA
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://www.p3-i.com/high-friction-surfacing

This information is filed by Puneet Singh on Mar 28, 2024
Contact Information:
	P3 INFRASTRUCTURE, INC.
	671 MCCAULEY RD.
	STOW, OH 44224
	Phone: 3304089502
	Email: PUNEET@P3-I.COM


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.