KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 27, 2024, its status is phase 10.

Notes:

Product has been sent to the New Products Review Committee (1/5/2024) - BSMITH The sample has been received. (7/25/2024) - BSMITH The product has been recommended for approval and is being moved to Phase 10, Approval. It will also be added to the List of Approved Materials as a Category I and II Bar Grout Adhesive. (8/27/2024) - BSMITH

Trade Name: AT-3G


Generic Name: adhesive anchor
This product is Not Patented

Manufacturer: Simpson Strong Tie
Address: 56591 St. Andrews Drive
	Macomb, MI 48042

Background description of company and its products:
	High Bond strength adhesive anchor system with super low temp installation.
Recommended Uses-Primary: Adhesive
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	High bond strength and cures to 0 degrees F.
General Composition of Material:
	Hybrid acrylic based adhesive
Date introduced on Market: 2023-08-01
Alternate for Following Existing Product: AT-XP
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 1 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M235 ASTM: C881 Fed. Spec.: KY: Others: ICC-ES ESR-5026
This product has/is being evaluated by following Highway authorities or agencies:
	Yes, has been submitted to Iowa, Wisconsin and Minnesota
This product is approved for use by other highway authorities or other agencies:
	Yes, Product has been approved by Iowa, Wisconsin and Minnesota
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://www.strongtie.com/acrylicanchoringadhesives_adhesives/at-3g_adhesive/p/a

This information is filed by Todd Hamilton on Dec 29, 2023
Contact Information:
	Simpson Strong Tie
	56591 St. Andrews Drive
	Macomb, MI 48042
	Phone: 586-201-8628
	Email: thamilton@strongtie.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
AT-3G Code Report ICCES_ESR5026.pdf	application/pdf	1901	840 Todd Hamilton	Simpson Strong Tie	Dec 29, 2023	6529	Yes
AT-3G Front Back Flyer.pdf	application/pdf	2757	840 Todd Hamilton	Simpson Strong Tie	Dec 29, 2023	6530	Yes
C-A-2023-p042-047.pdf	application/pdf	1007	840 Todd Hamilton	Simpson Strong Tie	Dec 29, 2023	6531	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	Y Approve	Approved for Rebar Grout Category I and II (Bmitchell 8-26-24)	Aug 26, 2024	3375

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us