KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Dec 18, 2023, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (12/18/2023) - BSMITH

Trade Name: Aerlite-iX


Generic Name:
This product is Not Patented

Manufacturer: Aerix Industries
Address: 7020 Snowdrift
	Allentown, PA 18106

Background description of company and its products:
	Aerix Industries has been around since 1942 and manufactures preformed foaming agents mixed with Cementitious material and water to produce Low density Cellular Concrete under 50 lbs/ft3
Recommended Uses-Primary: Grout, Non-Shrink Grout
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	Pumpable, flowable and designed to replace traditionally compacted backfills. No compaction required and compression testing done under C495
General Composition of Material:
	Cement, Water and foam - the specific ratios are determined by the compressive strength desired for a project
Date introduced on Market: 1990-07-30
Alternate for Following Existing Product: Traditionally compacted backfill
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C869, C796, C495 Fed. Spec.: KY: Others: specs availabe upon request
This product has/is being evaluated by following Highway authorities or agencies:
	CA, CO, NY, VA and many more - sample sate specifications are available
This product is approved for use by other highway authorities or other agencies:
	Routinely FHWA
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.aerixindustries.com

This information is filed by Nico Sutmoller on Dec 13, 2023
Contact Information:
	Aerix Industries
	7020 Snowdrift
	Allentown, PA, PA 18106
	Phone: 18047406772
	Email: nsutmoller@aerixindustries.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

Specification LDCC.pdf	application/pdf	112	1272 Nico Sutmoller	Aerix Industries	Dec 13, 2023	6522	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	528 Wesley Glass Agency	Y Approve	There exists a special note for cellular concrete and the foaming agent. It must comply with the proper ASTM standards and certified as such. The cellular concrete is required to be placed by an experienced contractor. The requirements to be met would be specific to the project and design. There is no listing for these products on the KY List of Approved Materials. The resulting product would have to meet plan and special note requirements specific to the contract.	Dec 22, 2023	3297

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us