KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Mar 20, 2024, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (10/16/2023) - BSMITH The sample has been received. (2/6/2024) - BSMITH This product does not meet the requirements for Rebar Grout Category I or II. See comment in under the Recommendations Tab of the KyPEL submittal regarding C881 Type IV and V. (3/20/2024) - BSMITH

Trade Name: SpecPoxy 3000FS


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
21-1357 - NTPEP - ERB 2021-01-003 - SpecChem - SpecPoxy 3000 FS - C881 Data - 11-16-2021 (1).pdf	application/pdf	74	1261 William Fleming	SpecChem	Oct 16, 2023	6496	Yes
ASTM C 881 -SpecPoxy 3000 FS Final Report 8-26-2020.pdf	application/pdf	226	1261 William Fleming	SpecChem	Oct 16, 2023	6497	Yes
SpecPoxy-3000-FS-SDS.pdf	application/pdf	536	1261 William Fleming	SpecChem	Oct 16, 2023	6498	Yes
Specpoxy-3000-FS-Tech-Sheet (4).pdf	application/pdf	254	1261 William Fleming	SpecChem	Oct 16, 2023	6499	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC Division of Materials	978 Buan Smith Agency	U Undecided	Comments added for Chemistry Section. Rebar Grout Category I – no Rebar Grout Category II – no C881 Type IV – no (data from 2020) C881 Type V – no (data from 2020) The data for Type IV and Type V is from 2017 and does not comply with Section 826.02 stating that independent laboratory must be conducted within one year of the date of product submittal.	Mar 20, 2024	3323
KyTC Maintenance	1183 Dora Alexander Agency	Y Approve	If it goes through all of the Division of Material's testing, etc. it seems like it would be a product to add to the list.	Jan 29, 2024	3313
KYTC	567 Brandi Mitchell Agency	U Undecided	Joint sealers are outside of my purview.	Jan 24, 2024	3304

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: SpecPoxy 3000FS
This product is Not Patented

Manufacturer: SpecChem
Address: 1511 Baltimore Ave
	Kansas City , MO 64108

Background description of company and its products:
	SpecChem is an American manufacturer, headquartered in the Heartland, supplying the concrete distributor network with high quality, industry-leading concrete construction materials.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Joint Sealers, Healers and Fillers
Outstanding Features or Advantages Claimed:
	VOC content = 0 grams per liter Vertical and overhead structural bonding and patching For use in concrete, block, brick, or stone Sealing of cracks and the setting of injection ports Anchors bolts, dowels, and reinforcing steel
General Composition of Material:
	SpecPoxy 3000 FS is a two-component, moisture insensitive, high modulus, structural epoxy bonding gel that is one part resin one part hardener designed to set quicker than SpecChem's 3000FS. SpecPoxy 3000 FS is 100% solids, solvent-free, low odor, high-strength, and non-sag.
Date introduced on Market: 2006-09-01
Alternate for Following Existing Product: Dural fast set gel, Rapid Gel, Sikadur Hi Mod 33
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C881 Fed. Spec.: KY: 510 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	GA, ID, IN, IA ,KS, LA, MN, MO, NE, NJ, NC, TN, TX, UT
This product is approved for use by other highway authorities or other agencies:
	GA, ID, IN, IA ,KS, LA, MN, MO, NE, NJ, NC, TN, TX, UT
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://specchem.com/product/specpoxy-3000-fs/

This information is filed by William Fleming on Oct 16, 2023
Contact Information:
	SpecChem
	1511 Baltimore Ave
	Kansas City , MO 64108
	Phone: 4104469253
	Email: dfleming@Specchem.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us