KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Nov 12, 2024, its status is phase 13.

Notes:

Product has been sent to the New Products Review Committee (11/23/2022) - BSMITH This product is being rejected. This product does not meet viscosity for Class C; it does not meet gel time for Class B or C; data available for bond strength is not for 14 days. It is being moved to Phased 13, Product not approved. (11/12/2024) - BSMITH

Trade Name: CRACKBOND EPOTHANE T3


Generic Name:
This product is Not Patented

Manufacturer: Adhesives Technology Corp.
Address: 450 E Copans Rd.
	Pompano Beach, Florida 33064

Background description of company and its products:
	Adhesives Technology Corporation (ATC) is a leading manufacturer of construction and industry-related adhesives in epoxies, urethanes, acrylics, ester blends, and polyureas.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	? Lo-mod, fast cure epoxy/urethane hybrid ? Excellent bond strength ? Moisture-insensitive ? 45 - 60% elongation ? Retains tensile elongation at low temperatures ? Nonflammable ? Easy to mix - 1:1 ratio, color coded ? No primer required ? Designed for automated pump or hand mix application ? Made in the USA in accordance with CFR 49 section 50101
General Composition of Material:
	Epoxy Urethane Hybrid
Date introduced on Market: 2021-08-17
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided



This product meets requirements of following specifications:
	AASHTO: ASTM: C881 Fed. Spec.: KY: 826 Type III Others:
This product has/is being evaluated by following Highway authorities or agencies:

This product is approved for use by other highway authorities or other agencies:
	Yes approved in Nebraska, Oregon, Indiana
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://atcepoxy.com/products/healer-sealers-overlays/crackbond-epothane-t3/

This information is filed by Renee Thomas on Nov 21, 2022
Contact Information:
	Adhesives Technology Corp.
	450 E Copans Rd.
	Pompano Beach, Florida 33064
	Phone: 9547894764
	Email: rthomas@atcepoxy.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

SDS-CRACKBOND-EPOTHANE-T3.pdf	application/pdf	4612	894 Renee Thomas	Adhesives Technology Corp.	Nov 21, 2022	6267	Yes
TDS-CRACKBOND-EPOTHANE-T3-v1.0.pdf	application/pdf	816	894 Renee Thomas	Adhesives Technology Corp.	Nov 21, 2022	6268	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	N Disapprove	This product does not meet viscosity for Class C; it does not meet gel time for Class B or C; data available for bond strength is not for 14 days.	Nov 12, 2024	3403

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us