KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Nov 23, 2022, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (11/23/2022) - BSMITH

Trade Name: ProGuard Bonder Paste LP


Generic Name: N/A
This product is Not Patented

Manufacturer: ChemCo Systems
Address: 2800 Bay Rd
	Redwood City, California 94063

Background description of company and its products:
	Founded in 1993 by the same experienced technical staff who developed the SCB® system of structural crack repair at Adhesive Engineering, ChemCo Systems manufactures a diverse selection of polymer systems for use in construction applications.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	Convenient 1:1, by vol. mix ratio High chemical and radiation resistance Bonds to dry and damp substrate No sag or flow at applied thickness of 1/4 inch Environmentally safe- No VOC solvents
General Composition of Material:
	Epoxy
Date introduced on Market: 2020-01-02
Alternate for Following Existing Product: Pro-Poxy 300
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M235 ASTM: C881 Fed. Spec.: N/A KY: SECTION 826 - EPOXY RESIN SYSTEMS Others:
This product has/is being evaluated by following Highway authorities or agencies:
	N/A
This product is approved for use by other highway authorities or other agencies:
	Just started submitting this product.
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: N/A Contact Date:

Product Web Page: https://www.chemcosystems.com/

This information is filed by Sara Geary on Nov 21, 2022
Contact Information:
	Poly-Tuff Systems International
	8550 West Desert Inn Road, Suite #102-451
	Las Vegas, NV 89117
	Phone: 5623787407
	Email: sara@chemcosystems.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
22-157 - Polytuff - ProGuard E-TUFF Bonder Paste LP - C881 Series - Grade 3 - 20220822_R.pdf	application/pdf	338	1188 Sara Geary	Poly-Tuff Systems International	Nov 21, 2022	6265	Yes
ProGuard Bonder Paste LP A-Side_SDS_Final.pdf	application/pdf	670	978 Buan Smith	KYTC Division of Materials	Nov 23, 2022	6269	Yes
ProGuard Bonder Paste LP B-Side_SDS_Final.pdf	application/pdf	846	978 Buan Smith	KYTC Division of Materials	Nov 23, 2022	6270	Yes
TDS Chemco-ProGuard Bonder Paste LP 20220825TL_2.pdf	application/pdf	431	1188 Sara Geary	Poly-Tuff Systems International	Nov 21, 2022	6262	Yes

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us