KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Oct 28, 2022, its status is phase 4.

Notes:

Product has been sent to the New Products Review Committee (10/14/2022) - BSMITH It has been recommended that this product be placed in the Experimental Phase, Phase 4 for a trial of this product. It would be up to the Vendor to secure a Department project with waterproofing of a bridge deck is part of the contract. Please keep the Division of Materials notified of the progress and should a project be secured, specifically Buan Smith. (10/28/2022) - BSMITH

Trade Name: BDM


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
BP Highway Waterproofing Spec. with Asphalt Wearing Course Rev. 06APR20.docx	application/docx	40	978 Buan Smith	KYTC Division of Materials	Oct 14, 2022	6249	Yes
CTDOT0056-0316_WaterproofingSpecification.pdf	application/pdf	231	978 Buan Smith	KYTC Division of Materials	Oct 14, 2022	6250	Yes
NEDOT22731_WaterproofingSpecification.pdf	application/pdf	34	978 Buan Smith	KYTC Division of Materials	Oct 14, 2022	6251	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	U Undecided	This material is outside of my purview. This material is outside of my purview.	Nov 15, 2024	3408
KyTC Construction	1092 Matt Simpson Agency	Y Approve	I agree an experimental installation would be good for bridge maintenance to evaluate/monitor.	Nov 03, 2022	3181
KYTC	313 Michael T. Black, P.E. Agency	Y Approve	Would recommend application for experimental use in order to further evaluate in the field.	Oct 27, 2022	3166
KyTC Maintenance	1183 Dora Alexander Agency	Y Approve	Product would need to go through the process, but it looks like a good alternative to the current waterproofing membrane.	Oct 14, 2022	3163

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: Cold Spray Applied Bridge Deck Waterproofing Membrane
This product is Not Patented

Manufacturer: PPG
Address: 64 B Street
	Hull, MA 02045

Background description of company and its products:
	Bridge Preservation manufacturers a high performance spray applied bridge deck waterproofing membrane system for use on concrete or steel bridge decks, typically used with an asphalt overlay
Recommended Uses-Primary: Waterproofing Membranes and Materials
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	Long Term Performance characteristics •Long Term Performance characteristics; will not degrade over time •Can remain in place for multiple paving cycles •Excellent dynamic crack bridging capabilities passing ASTM C-1305 •Completely Seamless and terminates vertically onto barrier walls and headers •Excellent bond to both substrate and asphalt overlay •Can be trafficked temporarily for prolong paving operations, ideal for night construction or rapid bridge construction •Can be installed at temperatures below freezing
General Composition of Material:
	Polyurea
Date introduced on Market: 2000-01-01
Alternate for Following Existing Product: Asphaltic Waterproofing Membranes
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing


This product meets requirements of following specifications:
	AASHTO: ASTM: Fed. Spec.: KY: MADISON COUNTY FD04 076 0169 011- Others:
This product has/is being evaluated by following Highway authorities or agencies:

This product is approved for use by other highway authorities or other agencies:
	CT DOT, Nebraska DOT, Mass DOT, Wyoming DOT, NYS DOT, Alaska DOT, others
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://bridgepreservation.com/

This information is filed by David Lite on Oct 13, 2022
Contact Information:
	PPG
	64 B Street
	Hull, MA 02045-1941
	Phone: 7814276116
	Email: dlite@ppg.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us