KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jan 13, 2022, its status is phase 4.

Notes:

Product has been recommended for Phase 4, Experimental. Please review the definition of Phase 4 under Phase Explanation in KyPEL. It will be the Vendors responsibility to find a Contractor with an appropriate Department project for a trial. (1/1/2022) - BSMITH

Trade Name: KBP PPC 1121 EC


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
2021 (3).zip	application/zip	6318	1187 Bobby Scarpitto	Kwik Bond Polymers	Dec 16, 2021	6008	Yes
4 Binder Resin and Composite Properties KBEC Package.pdf	application/pdf	5570	1187 Bobby Scarpitto	Kwik Bond Polymers	Dec 16, 2021	6009	Yes
East Coast top sand (1).pdf	application/pdf	163	1187 Bobby Scarpitto	Kwik Bond Polymers	Dec 16, 2021	6010	Yes
KBP PDS PPC1121 EC.pdf	application/pdf	106	1187 Bobby Scarpitto	Kwik Bond Polymers	Dec 16, 2021	6005	Yes
KwikBondPPC1121 ClosurePourMaterial.pdf	application/pdf	2496	1187 Bobby Scarpitto	Kwik Bond Polymers	Dec 16, 2021	6006	Yes
PPC 1121 Notable Projects List.pdf	application/pdf	1980	1187 Bobby Scarpitto	Kwik Bond Polymers	Dec 16, 2021	6007	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	U Undecided	This material is outside of my purview and I will defer to Wesley Glass.	May 02, 2022	3126
KYTC	313 Michael T. Black, P.E. Agency	Y Approve	Recommend for experimental use. Recommend for experimental use.	Dec 22, 2021	3069
KyTC Maintenance	1183 Dora Alexander Agency	Y Approve	Seems ok to proceed further with experimentation, etc.	Dec 21, 2021	3064
KYTC	528 Wesley Glass Agency	Y Approve	Recommendation to allow a contractor to place as an experimental application. Due to resin composition vs cementitious other sections input/oversight needed.	Dec 21, 2021	3061

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: PPC
This product is Not Patented

Manufacturer: Kwik Bond Polymers
Address: 13369 13th St. NW
	Spicer, MN 56288

Background description of company and its products:
	PPC was developed 36 years ago in collaboration with Cal Trans. This material is currently used in 40+ states as a bridge deck overlay and concrete repair material.
Recommended Uses-Primary: Concrete Patching Material
Recommended Uses-Alternate: Concrete Patching Material
Outstanding Features or Advantages Claimed:
	2 hour return to traffic Impervious to salts and chlorides
General Composition of Material:
	Polyester Polymer Concrete = Resin, Rock & Sand
Date introduced on Market: 1983-08-01
Alternate for Following Existing Product: Rapid Set/Polymer based concrete repair materials
Cost Per Unit Material (F.O.B.):
Royalty Cost: $0.00
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 5 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C1583 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Nebraska DOT, MN DOT, IN DOT, NC DOT, SC DOT & Others
This product is approved for use by other highway authorities or other agencies:
	IN DOT has a 2-year IDIQ with Kwik Bond for patching and repair material. Nebraska has PPC 1121 listed on their Approved Products list for patching, headers, nosing and full depth repairs.
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page:

This information is filed by Bobby Scarpitto on Dec 16, 2021
Contact Information:
	Kwik Bond Polymers
	13369 13th St. NW
	Spicer, MN 56288
	Phone: 3202217611
	Email: bobby@kwikbondpolymers.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us