KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 17, 2021, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee. Please provide NTPEP test results. This can be added to the Attachments Section. (6/16/2021) - BSMITH A sample of the product has been requested. Please send a sample, approximately 50 cu-in (8"x3"x2" is our typical sample box size) to: Attn: Buan Smith Kentucky Transportation Cabinet Division of Materials 1227 Wilkinson Blvd Frankfort, KY 40601 (6/17/2021) - BSMITH

Trade Name: Macseal 6690-1


Generic Name:
This product is Not Patented

Manufacturer: McAsphalt Industries Limited
Address: 8800 Sheppard Avenue East M1B 5R4
	Toronto, ON 00000

Background description of company and its products:
	MACSEAL products are hot applied, single component joint and crack sealants for pavement maintenance and construction - recommended for the large-scale sealing of joints and random cracks in cement concrete and asphaltic concrete pavements.
Recommended Uses-Primary: PCC Joint Sealant and HMA Crack Sealers*
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	NTPEP Product Number - CS-2017-01-004 MACSEAL 6690-1 offers advanced low temperature bonding properties, prolonged resistance to degradation from weather and a positive seal during the expansion and contraction of the joint or crack. It remains ductile and highly resilient at low and high service temperatures.
General Composition of Material:
	MACSEAL 6690-1 is a formulated blend of engineered asphalts, virgin polymers, synthetic rubbers, reinforcing fillers, anti-oxidants and UV inhibitors.
Date introduced on Market: 1960-01-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided



This product meets requirements of following specifications:

This product has/is being evaluated by following Highway authorities or agencies:

This product is approved for use by other highway authorities or other agencies:
	North Carolina - Routine, Pennsylvania - Routine
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://mcasphalt.com/products/pavement-maintenance/macseal-pavement-sealants/

This information is filed by Chelsea Schonberg on Jun 15, 2021
Contact Information:
	McAsphalt Industries Limited
	8800 Sheppard Avenue East
	Toronto , ON M1B5R4
	Phone: 9054362946
	Email: cschonberg@mcasphalt.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
124_P-0018588_95608_1_20-2258_MACSEAL 6690-1_Lot 156983.pdf	application/pdf	161	1162 Chelsea Schonberg	McAsphalt Industries Limited	Jun 15, 2021	5820	Yes
MACSEAL Installation Instructions.pdf	application/pdf	240	1162 Chelsea Schonberg	McAsphalt Industries Limited	Jun 15, 2021	5819	Yes
MACSEAL Joint and Crack Sealant Safety Data Sheet.pdf	application/pdf	123	1162 Chelsea Schonberg	McAsphalt Industries Limited	Jun 15, 2021	5817	Yes
MCA PDS - Macseal 6690-1.pdf	application/pdf	156	1162 Chelsea Schonberg	McAsphalt Industries Limited	Jun 15, 2021	5818	Yes

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.