KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Feb 16, 2022, its status is phase 13.

Notes:

Please add additional information about the product (specifications, material safety, testing...) for proper review. (4/30/2021) - BSMITH Product has been sent to the New Products Review Committee (4/30/2021) - BSMITH. A sample has been requested for "pull test". Please sent a sample to the attention of Buan Smith Kentucky Transportation Cabinet Division of Materials 1227 Wilkinson Blvd. Frankfort, KY 40601 (11/9/2021) - BSMITH The product sample has been received. (11/29/2021) - BSMITH This product is not approved for use. Please see the comments under the Recommendations tab for an explanation. (2/15/2022) - BSMITH

Trade Name: Dural 452 LV


Generic Name:
This product is Not Patented

Manufacturer: The Euclid Chemical Company
Address: 19320 Redwood Rd.
	Cleveland, Ohio 44110

Background description of company and its products:
	Euclid Chemical is a world leading manufacturer of specialty chemical products for the concrete and masonry construction industry. For over a century, Euclid Chemical has built a reputation on quality products, innovation, and putting people first.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Epoxy and Resin Based Adhesive Bonding Systems
Outstanding Features or Advantages Claimed:
	• Exceptional adhesion to construction materials • Low viscosity penetrates deep into cracks • Easy to use 2:1 mix ratio • Moisture insensitive • Tenacious bond strength
General Composition of Material:
	Bisphenol A Polyglycidyl Ether Resin
Date introduced on Market: 2012-09-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 7 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing


This product meets requirements of following specifications:
	AASHTO: M235 ASTM: C881 Fed. Spec.: KY: 826.02.01 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Idaho, Indiana, Louisiana, Mississippi, New Hampshire, New Mexico, Nevada
This product is approved for use by other highway authorities or other agencies:
	Arizona, Florida, Iowa, Kansas, Massachusetts, Maine, Minnesota, North Carolina, Nebraska, New Jersey, Ohio, Oregon, Tennessee, Utah, Vermont
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://www.euclidchemical.com/products/construction-products/bonding-agents-adh

This information is filed by Mark Ferfolia on Apr 30, 2021
Contact Information:
	The Euclid Chemical Company
	19320 Redwood Rd.
	Cleveland, Ohio 44110
	Phone: 216-692-8342
	Email: mferfolia@euclidchemical.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	N Disapprove	Please submit a sample of Dural 452 LV for pull testing. Sample was submitted but upon inspection it did not appear suitable for pull testing. Upon review of the manufacturer's TDS, the bond strength is on l 1300 psi at 2 days, which is insufficient to pass testing. Furthermore, the TDS states that this product should not be used for horizontally aligned anchors and all products on C881 Type IV should be capable of being applied both horizontally and vertically. UPDATE: This material was submitted in cartridges but it is still not suitable for horizonal application due to an incredibly low viscosity (41.3 KU).	Sep 08, 2022	3156
KYTC	567 Brandi Mitchell Agency	N Disapprove	Please submit a sample of Dural 452 LV for pull testing. Sample was submitted but upon inspection it did not appear suitable for pull testing. Upon review of the manufacturer's TDS, the bond strength is on l 1300 psi at 2 days, which is insufficient to pass testing. Furthermore, the TDS states that this product should not be used for horizontally aligned anchors and all products on C881 Type IV should be capable of being applied both horizontally and vertically.	Feb 15, 2022	3077
KYTC	567 Brandi Mitchell Agency	U Undecided	Please submit a sample of Dural 452 LV for pull testing.	Nov 09, 2021	3043
KYTC	528 Wesley Glass Agency	U Undecided	This is a C881 epoxy and will defer to Chemistry's review.	Oct 29, 2021	3040

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.