KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 27, 2024, its status is phase 10.

Notes:

Product has been sent to the New Products Review Committee (9/21/2020)- BSMITH. A sample of the product has been requested. Please send a sample to: Buan Smith Kentucky Transportation Division of Material 1227 Wilkinson Blvd Frankfort, Kentucky 40601 (10/27/2020) - BSMITH The sample has been received. (7/25/2024) - BSMITH The product has been recommended for approval and is being moved to Phase 10, Approval. It will also be added to the List of Approved Materials as a Category II Bar Grout Adhesive. (8/27/2024) - BSMITH

Trade Name: SET-3G


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

C-A-2018-SET-3G-designinfo.pdf	application/pdf	390	840 Todd Hamilton	Simpson Strong Tie	Sep 21, 2020	5537	Yes
ESR-4057.pdf	application/pdf	2812	840 Todd Hamilton	Simpson Strong Tie	Sep 21, 2020	5536	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	Y Approve	Please submit a sample to the Chemical Section for testing. Sample received and this product is approved for rebar grout Category II (bmitchell 8-26-24)	Aug 26, 2024	3377
KYTC	567 Brandi Mitchell Agency	U Undecided	Please submit a sample to the Chemical Section for testing. Sample received and this product is approved for rebar grout Category II (bmitchell 8-26-24)	Aug 26, 2024	3376
KYTC	567 Brandi Mitchell Agency	U Undecided	Please submit a sample to the Chemical Section for testing.	Oct 26, 2020	2784
KYTC	528 Wesley Glass Agency	U Undecided	Appears this may qualify for the C881 epoxies found on the Materials Approved List. Will defer to the Chemistry Section for proper assessment.	Sep 23, 2020	2734

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: Adhesive Anchor System
This product is Not Patented

Manufacturer: Simpson Strong Tie
Address: 56591 St. Andrews Drive
	Macomb, MI 48042

Background description of company and its products:
	Simpson Strong-Tie is a public US company that supplies construction products to the global construction market.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Structural Materials and Components
Outstanding Features or Advantages Claimed:
	It has a market leading bond strength and it is not made Europe, but is made in the USA. Code listed and meets ACI355.4.
General Composition of Material:
	two part epoxy anchor system.
Date introduced on Market: 2018-04-01
Alternate for Following Existing Product: Hilti RE500 V3
Cost Per Unit Material (F.O.B.):
Royalty Cost: $0.00
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within 1 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M235 ASTM: C881 type I and V grade 3 class C Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Indiana and Minnesota
This product is approved for use by other highway authorities or other agencies:
	Texas, Florida
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: https://www.strongtie.com/epoxyanchoringadhesives_adhesives/set-3g_adhesive/p/se

This information is filed by Todd Hamilton on Sep 21, 2020
Contact Information:
	Simpson Strong Tie
	56591 St. Andrews Drive
	Macomb, MI 48042
	Phone: 586-201-8628
	Email: thamilton@strongtie.com


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us