KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Nov 08, 2019, its status is phase 10.

Notes:

Product has been sent to the New Products Review Committee (11/5/19) - BSMITH Product has been approved by the Review Committee and will be added to the List of Approved Materials. (11/8/19) - BSMITH

Trade Name: Avery Dennison OmniCube T-11513 FYG Type XI


Generic Name: T-11513 Fluorescent Yellow Green
This product is Patented

Manufacturer: Avery Dennison Reflective Solutions
Address: 7542 Natchez Ave
	Niles, Illinois 60714

Background description of company and its products:
	Avery Dennison is a fortune 500 company that manufactures thousands of products worldwide.Avery Dennison delivers Retroreflective sheeting to over 40 countries every year and has a solid history of standing behind its products and warranties.
Recommended Uses-Primary: Sign Sheeting Material*
Recommended Uses-Alternate: Sign Sheeting Material*
Outstanding Features or Advantages Claimed:
	OmniCube''''s intelligent cube technology incorporates the needs of all vehicle types such as trucks,SUVs,Automobiles,and motor cycle into one reflective sheeting.It is specified for all traffic applications because of its bright performance at short, medium and long distances.Successfully Tested on NTPEP , data is attached.
General Composition of Material:
	High Gloss Acrylic Retroreflective film with Microprisms, permenanat pressure sensitive adhesive with polypropylene liner
Date introduced on Market: 2010-01-01
Alternate for Following Existing Product: any full cube Type XI Fluorescent Yellow Green
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: Type D ASTM: D 4956 Type XI Fed. Spec.: KY: 830.02.06 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Yes, many. Indiana DOT Oklahoma dOT Pennsylvania DOT
This product is approved for use by other highway authorities or other agencies:
	Yes, many. Few approval letters are attached. Indiana DOT Oklahoma dOT Pennsylvania DOT
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.reflective.averydennison.com

This information is filed by Nipa Joshi on Nov 04, 2019
Contact Information:
	Avery Dennison Reflective Solutions
	902 Feehanville Drive
	Mount Prospect, IL 60056
	Phone: 8476273111
	Email: Nipa.joshi@averydennison.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	Y Approve	Nov 08, 2019	2569

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us