KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Mar 11, 2019, its status is phase 4.

Notes:

Product has been sent to the New Products Review Committee (3/6/19) - BSMITH. Product has been recommended to Phase 10 approval, there is a Special Note for this type product. Please notify KyTC Material Division should this product be installed on a KyTC project for documentation purposes. (3/11/19) - BSMITH This product Phasing is revised to Phase 4 Experimental. This is due to the Special Note's continued use to be uncertain at this time. See Reviewers comments. Contact the Cabinet prior to utilization of KyTC projects. (3/11/19) - BSMITH

Trade Name: NovaForm PVC Liner


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
1504 Letter of Compliance - Copy.pdf	application/pdf	51	997 Robin Hershman	IPEX USA LLC	Mar 06, 2019	4894	Yes
70142387 letter of attestation 2018 02 01 - Copy.pdf	application/pdf	105	997 Robin Hershman	IPEX USA LLC	Mar 06, 2019	4895	Yes
NovaForm General Specification for Pipe Rehabilitation using PVC Fold an.._ (003).pdf	application/pdf	269	997 Robin Hershman	IPEX USA LLC	Mar 06, 2019	4898	Yes
SDDOT Spec.pdf	application/pdf	180	997 Robin Hershman	IPEX USA LLC	Mar 06, 2019	4896	Yes
Utah DOT Spec.doc	application/msword	83	997 Robin Hershman	IPEX USA LLC	Mar 06, 2019	4897	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	572 Doug Gesso Agency	Y Approve	This is a standard form of pipe liner product. Recommend approval for phase IV at a minimum. Special Note status for standard use is uncertain at this time.	Mar 11, 2019	2324
KYTC	528 Wesley Glass Agency	Y Approve	Recommend approval for application on an appropriate project. Buan and I have discussed. I do not have a copy of the existing special note that would apply to this product but if meets the requirements of the special note it would seem appropriate to revise status to Phase 10.	Mar 08, 2019	2322
The Kentucky Transportation Cabinet	885 Dorian Brawner Agency	Y Approve	The product meets or exceeds The ASTM standard. Recommend approval on appropriate projects.	Mar 07, 2019	2317
KYTC	528 Wesley Glass Agency	Y Approve	Recommend approval for application on an appropriate project.	Mar 07, 2019	2316

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: Fold and Form
This product is Not Patented

Manufacturer: IPEX USA LLC
Address: 10100 Rodney Street
	Charolette, NC 28078

Background description of company and its products:
	Leader in thermoplastic piping systems, IPEX companies design and manufacture the largest, most recognized and diverse range of integrated piping products – to manage the full spectrum of today’s municipal, industrial, commercial, residential challenges
Recommended Uses-Primary: Culverts and Drainage Structures
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	NovaForm is a PVC based structural liner which allows municipalities to repair failing infrastructure using trenchless methods. NovaForm is environmentally friendly and styrene free. NovaForm combines long term strength and flexibility to handle the most challenging conditions and is ASTM F1504 compliant and CSA certified
General Composition of Material:
	PVC based material
Date introduced on Market: 2015-01-15
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 30 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided



This product meets requirements of following specifications:
	AASHTO: ASTM: F1504 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	South Dakota, Colorado most recently
This product is approved for use by other highway authorities or other agencies:
	TN CO SD GA AL UT currently allow fold and form and it has been previously used in KY. I have documentation but did not see and attachment option.
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: http://ipex-cms.dev.kpd-i.com/usa/products/municipal/sewer-piping-systems/novafo

This information is filed by Robin Hershman on Mar 06, 2019
Contact Information:
	IPEX USA LLC
	9180 Halston Circle
	NEwburgh, Indiana 47630
	Phone: 812-319-6098
	Email: robin.hershman@ipexamerica.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.