KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 12, 2021, its status is phase 10.

Notes:

Product has been sent to the New Products Review Committee (5/21/18). Product does not meet requirements of the Special Note. The Vendor was contacted in September of 2020 by the Chemistry Section. Product will be moved to Phase 13, not approved. (10/27/2020) - BSMITH CORRECTION: This product was added to the LAM 12-1-2014. (10/28/2020) - BSMITH For Applications as a Type III Epoxy Resin The reviewer had asked for supporting laboratory testing in February of this Year. Please attach this information to the submittal when obtained. (7/12/2021) - BSMITH

Trade Name: Sikadur 22 LoMod


Generic Name: Low Modulus Epoxy
This product is Patented

Manufacturer: Sika Corporation
Address: 1024 West Bridlepath Lane
	Loveland, Ohio 45140

Background description of company and its products:
	Sika Corporation manufactures products for concrete repair, corrosion control, CFRP Strengthening, joint sealants and protective coating systems.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Waterproofing Membranes and Materials
Outstanding Features or Advantages Claimed:
	NTPEP Approved and approved by Kentucky for PCO applications. Please add to the Type 3 epoxy for sealing the bridge deck to parapet wall area.
General Composition of Material:
	Low Modulus Epoxy
Date introduced on Market: 1970-01-01
Alternate for Following Existing Product: None
Cost Per Unit Material (F.O.B.): $120.00
Royalty Cost: $0.00
Cost Per Unit in Place: $300.00

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 7 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: Fed. Spec.: KY: Others: NTPEP
This product has/is being evaluated by following Highway authorities or agencies:
	Approved by several other states
This product is approved for use by other highway authorities or other agencies:
	Yes; Sikadur 22 Lo Mod is approved by several states
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Division of Materials Contact Date: September 01, 2014

Product Web Page: usa.sika.com

This information is filed by Sean Gallagher on May 17, 2018
Contact Information:
	Sika Corporation
	1024 West Bridlepath Lane
	Loveland, Ohio 45140
	Phone: 513-403-5742
	Email: sgallagher1024@gmail.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	U Undecided	For further review this product needs independent laboratory test data.	Feb 16, 2021	2877

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us