KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Oct 25, 2021, its status is phase 4.

Notes:

Product has been sent to the New Products Review Committee and as of 4/3/18 will be placed in Phase 4 (Can be used for experimental use) based on previous field performance. Please contact KYTC to verify application prior to placement on projects (4/3/18) - MBLACK. Adding reviews to the Committee. (10/25/2021) - BSMITH

Trade Name: Mastic One


Generic Name:
This product is Not Patented

Manufacturer: Crafco
Address: 6165 W. Detroit St.
	Chandler, AZ 85226

Background description of company and its products:
	Since 1976, Crafco, Inc. has supplied the pavement preservation industry with quality products including crack sealant, joint sealant, patching products, geo-composites and related application equipment.
Recommended Uses-Primary: Asphalt Patching Material
Recommended Uses-Alternate: Joint Sealers, Healers and Fillers
Outstanding Features or Advantages Claimed:
	Sealing, filling and repairing many distresses in both asphalt concrete and Portland cement concrete pavements and bridge deck surfaces that are larger than those typically repaired by crack or joint sealing, but smaller than repairs requiring remove and replace patching procedures
General Composition of Material:
	Hot applied, pourable, aggregate filled, black color, polymer modified asphalt pavement repair mastic.
Date introduced on Market: 2005-01-01
Alternate for Following Existing Product: N/A
Cost Per Unit Material (F.O.B.): $0.85
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: N/A ASTM: N/A Fed. Spec.: N/A KY: N/A Others: N/A
This product has/is being evaluated by following Highway authorities or agencies:
	N/A
This product is approved for use by other highway authorities or other agencies:
	GADOT- Approved LADOT- Approved MSDOT- Approved TNDOT- Approved
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.crafco.com

This information is filed by Angie Hoaglin on Apr 02, 2018
Contact Information:
	Crafco
	6165 W. Detroit St.
	Chandler, AZ 85226
	Phone: 602-276-0406
	Email: angie.hoaglin@crafco.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	967 Josh Rogers Agency	Y Approve	We need to try this out in the field and monitor results to compart to data sheets before implementation.	Oct 26, 2021	3026
Kentucky Transportation Cabinet/Division of Materials	718 Robert Semones Agency	N/A	Approved to be used as experimental on a non-state route. Once the product has shown to perform according to the spec and data sheet, it can then be used as experimental on a state route.	Jul 16, 2018	2154
KYTC	933 Joe Tucker Agency	Y Approve		Apr 23, 2018	2084
KYTC	313 Michael T. Black, P.E. Agency	Y Approve	Product has been sent to the New Products Review Committee and as of 4/3/18 will be placed in Phase 4 (Can be used for experimental use) based on previous field performance. Please contact KYTC to verify application prior to placement on projects (4/3/18) - MBLACK.	Apr 18, 2018	2083
KYTC	932 Ross Mills Agency	Y Approve	I recommend the continued allowance of its use as long as the Division of Maintenance has had acceptable results in the field, based on past contracts.	Apr 17, 2018	2080
KYTC	528 Wesley Glass Agency	Y Approve	I recommend continued use on an experimental bases as a Phase 4 status.	Apr 10, 2018	2063

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us