KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Mar 12, 2018, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (2/13/18)- MBLACK

Trade Name: Resinator


Generic Name: N/A
This product is Not Patented

Manufacturer: Momar, Inc.
Address: 1830 Ellsworth Industrial Drive, NW
	Atlanta, Georgia 30518

Background description of company and its products:
	Momar, Inc. is a manufacturer of maintenance and sanitation chemicals providing products available in the areas of maintenance chemicals, lubrication, water treatment, food processing chemicals, mineral handling, and industrial safety.
Recommended Uses-Primary: Unknown
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	Resinator is a water-proof road and soil enhancer for heavy-traffic haul road stabilization, dust suppression, soil retention, prime coating, and erosion control that is available for use all year round. Fugitive dust emissions were reduced over 90% in case studies. Resinator is non-leaching and will not run off of treated areas or move through soil after application but is capable of penetrated even hard-packed roads to stabilize the driving surface, improving driving conditions while reducing dust, pot-holing, wash-boarding, silt-runoff, and aggregate loss. It is non-toxic to aquatic life and contains no VOCs, phosphates, APEs, carcinogens, mutagens, or other harmful compounds. Resinator is a cost-effective, durable, and environmentally sound solution for dust control and soil retention needs for both traffic and non-traffic areas that has been approved by PennState’s Center for Dirt and Gravel Road Studies. The department''''''''s current method for dust suppression has not been extensively detailed in the Standard Specifications for Road and Bridge Construction, but the main solution seems to be the usage of water. This is only a very temporary solution and can yield caking problems in the soils.
General Composition of Material:
	Proprietary asphaltene-free resin emulsion
Date introduced on Market: 2015-06-01
Alternate for Following Existing Product: N/A
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing


This product meets requirements of following specifications:
	AASHTO: ASTM: Fed. Spec.: KY: 107.01.04, 302.03.05 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Georgia Department of Transportation Ohio Environmental Protection Agency Pennsylvania Department of Transportation
This product is approved for use by other highway authorities or other agencies:
	Georgia Department of Transportation, routine Ohio Environmental Protection Agency, routine Pennsylvania Department of Transportation, routine
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: http://momar.com/item/13890/RESINATOR

This information is filed by John Steed on Feb 12, 2018
Contact Information:
	Momar, Inc.
	1830 Ellsworth Industrial Drive, NW
	Atlanta, Georgia 30518
	Phone: 404-355-4580
	Email: john.steed@momar.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
resinator approval (GDOT Soil Stabilization).pdf	application/pdf	1107	910 John Steed	Momar, Inc.	Feb 12, 2018	4432	Yes
resinator approval (penn dot).pdf	application/pdf	2213	910 John Steed	Momar, Inc.	Feb 12, 2018	4433	Yes
RESINATOR COMPLETE ASSEMBLY.pdf	application/pdf	10872	910 John Steed	Momar, Inc.	Feb 12, 2018	4431	Yes

Division	Reviewer	Recommendation	Date	Delete
Recommendations and Comments

KYTC	741 Samuel Collins Agency	Y Approve	Feb 14, 2018	2018
KYTC	616 Ryan Griffith Agency	Y Approve	Feb 13, 2018	2017

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.