KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Apr 25, 2022, its status is phase 13.

Notes:

Product has been sent to the NPRC. (12/27/17-MBLACK) Product received from vendor June 2018 (11/20/18) BSMITH The sample of FritzPak NCA has been received. (4/6/2022) - BSMITH The product has been moved to Phase 13, Disapproved. Comment is: "Upon receipt of sample, more attention was given to type of admixture. KY permits liquid admixtures only, except in the case of water reducing admixtures. This product, Fritz-Pak NCA, is a non-chloride accelerator, Type E, and would not meet the general specification." (4/25/2022) - BSMITH

Trade Name: Fritz-Pak NCA


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
IR SCAN - FRITZ-PAK NCA.pdf	application/pdf	37	870 Jane Ojeda	Fritz-Pak Corporation	Nov 20, 2017	4413	Yes
NTPEP TEST DATA - FRITZ-PAK NCA.pdf	application/pdf	123	870 Jane Ojeda	Fritz-Pak Corporation	Nov 20, 2017	4410	Yes
PRODUCT BULLETIN - FRITZ-PAK NCA.pdf	application/pdf	1493	870 Jane Ojeda	Fritz-Pak Corporation	Nov 20, 2017	4412	Yes
SDS - FRITZ-PAK NCA.docx	application/docx	40	870 Jane Ojeda	Fritz-Pak Corporation	Nov 20, 2017	4411	Yes
STATE APPROVALS - FRITZ-PAK NCA.pdf	application/pdf	1984	870 Jane Ojeda	Fritz-Pak Corporation	Nov 20, 2017	4414	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	528 Wesley Glass Agency	N Disapprove	NTPEP data has been reviewed. A sample is requested to be sent the Kentucky Transportation Cabinet, Division of Materials, 1227 Wilkinson Blvd, Frankfort KY 40601. Upon receipt of sample, more attention was given to type of admixture. KY permits liquid admixtures only, except in the case of water reducing admixtures. This product, Fritz-Pak NCA, is a non-chloride accelerator, Type E, and would not meet the general specification.	Apr 25, 2022	3108
KYTC	528 Wesley Glass Agency	U Undecided	NTPEP data has been reviewed. A sample is requested to be sent the Kentucky Transportation Cabinet, Division of Materials, 1227 Wilkinson Blvd, Frankfort KY 40601.	Jan 18, 2018	2010

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: NCA
This product is Not Patented

Manufacturer: Fritz-Pak Corporation
Address: 4821 Eastover Circle
	Mesquite, TX 75149

Background description of company and its products:
	Fritz-Pak Corporation has manufactured powdered, pre-measured concrete admixtures since 1998. Fritz-Pak Corporation purchased the Fritz Industries admixture division in 1998. Fritz-Pak NCA has been on the market since 2002.
Recommended Uses-Primary: Concrete Admixtures*
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	Fritz-Pak NCA is a powdered admixture packaged in water-soluble inner bags for convenient use at the plant or job site. It shortens set times while increasing early compressive strength. It contains no chloride. Mixing requires only 5 to 7 minutes for complete dispersal throughout the load. Recommended dosage rates are from 1 - 3 lbs per 100 lbs of cementitious materials. Higher acceleration is obtained using cement with a ratio greater than 4.0 of C3A to SO3. Packaging is in 5-lb water soluble bags or 50-lb paper bags. Because it is a powder, is less costly to ship and to store than liquid products. It does not freeze, and if kept in a dry place will have a shelf life of up to 3 years.
General Composition of Material:
	Calcium Diformate - All test data and supporting documents being sent via UPS (tracking #1Z3E889W0356705974)
Date introduced on Market: 2002-01-02
Alternate for Following Existing Product: Chloride Containing and Liquid Set Accelerators
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M-194 ASTM: C 494, TYPE E Fed. Spec.: CRD C 87 KY: 802.01.04 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	AZ, CO, FL, IA, MO, OH, TN, TX, VA, WV, AND WY DOTS HAVE ALL APPROVED THE PRODUCT AND INCLUDED IT ON THEIR APPROVED LIST OF MATERIALS.
This product is approved for use by other highway authorities or other agencies:
	AZ, CO, FL, IA, MO, OH, TN, TX, VA, WV, AND WY DOTS HAVE ALL APPROVED THE PRODUCT AND INCLUDED IT ON THEIR APPROVED LIST OF MATERIALS.
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.fritzpak.com

This information is filed by Cheryl Flores on Nov 20, 2017
Contact Information:
	Fritz-Pak
	4821 Eastover Circle
	Mesquite, Texas 75182
	Phone: 2142219494
	Email: dot@fritzpak.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.