KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of , its status is phase 1.

Notes:

Trade Name: ULTRABOND HS-1CC


Generic Name: ULTRABOND HS-1CC
This product is Not Patented

Manufacturer: Adhesives Technology Corp.
Address: 450 E Copans Rd.
	Pompano Beach, Florida 33064

Background description of company and its products:
	Adhesives Technology Corp. (ATC) is a leading manufacturer of construction and industry related adhesives in epoxies, urethanes, acrylics, ester blends and polyureas.
Recommended Uses-Primary: Structural Materials and Components
Recommended Uses-Alternate: Epoxy and Resin Based Adhesive Bonding Systems
Outstanding Features or Advantages Claimed:
	Anchoring threaded rod and reinforcing bar (rebar) into cracked or uncracked concrete using either hammer drill or core drill (uncracked only) ? Epoxy anchoring system for dry, water-saturated, water-filled & submerged conditions
General Composition of Material:
	Epoxy - See attached Safety Data Sheet with material compositions
Date introduced on Market: 2017-08-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 15 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M235 ASTM: C881 Fed. Spec.: KY: 826 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Nebraska - Listed on their QPL Kentucky - Under evaluation Arizona - Under evaluation Virginia - Listed on their QPL Oklahoma - Under evaluation Nevada - Under evaluation Mississippi - Under evaluation Maryland - Under evaluation Colorado - Under evaluation
This product is approved for use by other highway authorities or other agencies:
	Nebraska - Listed on their QPL Virginia - Listed on their QPL
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page:

This information is filed by Renee Thomas on Oct 16, 2017
Contact Information:
	Adhesives Technology Corp.
	450 E Copans Rd.
	Pompano Beach, Florida 33064
	Phone: 9547894764
	Email: rthomas@atcepoxy.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
17-662 - Adhesives Tech - HS1CC - ASTM C881 - 07-28-2017.pdf	application/pdf	218	804 William Semones	KYTC	Oct 17, 2017	4361	Yes
SDS-ULTRABOND HS-1CC_v1.0.pdf	application/pdf	3094	804 William Semones	KYTC	Oct 17, 2017	4362	Yes
TDS HS-1CC v0.1 .pdf	application/pdf	846	804 William Semones	KYTC	Oct 17, 2017	4363	Yes

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us