KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 15, 2017, its status is phase 2.

Notes:

Product Updated to Phase 2 on 8/15/2017 Product has been sent to the New Products Review Committee (8/15/17). WPS

Trade Name: MDS TL4 Barrier


Generic Name: Steel Barrier
This product is Not Patented

Manufacturer: eNdoto Corp.
Address: 43 Franklin St
	Hartford, Connecticut 06108

Background description of company and its products:
	Providing innovative products and idea for both pedestrian and traffic safety.
Recommended Uses-Primary: Barriers, Fencing and Roadside Structures
Recommended Uses-Alternate: Structural Materials and Components
Outstanding Features or Advantages Claimed:
	MDS TL4 Barrier is a high performance vehicle restraint system, used for bridges, highway medians, work zones, and edges of roadways. It has the highest containment in a portable TL4 system. Light weight, only 54 pounds per foot. These barriers eliminate 90% of concrete barrier dead weight. They are easy to remove or replace if damaged. Comes with optional sound wall for roads near residential areas.
General Composition of Material:
	Steel
Date introduced on Market: 2010-01-01
Alternate for Following Existing Product: Concrete Barriers
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided



This product meets requirements of following specifications:
	AASHTO: ASTM: A283B Fed. Spec.: KY: Others: NCHRP 350, MASH TEST LEVEL 4
This product has/is being evaluated by following Highway authorities or agencies:
	NO
This product is approved for use by other highway authorities or other agencies:
	Contacts can be provided upon further request
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.endotocorp.com

This information is filed by Nicole Bolduc on Aug 02, 2017
Contact Information:
	eNdoto Corp.
	43 Franklin St
	East Hartford, Connecticut 06108
	Phone: 860-289-8033
	Email: nicole@endotocorp.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

TL4 MDS Brochure V9-USA.pdf	application/pdf	6256	876 Nicole Bolduc	eNdoto Corp.	Aug 02, 2017	4292	Yes

Division	Reviewer	Recommendation	Date	Delete
Recommendations and Comments

KYTC	616 Ryan Griffith Agency	U Undecided	Oct 10, 2017	1987
Maintenance	111 Rusty Wallace Agency	U Undecided	Sep 20, 2017	1973

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us