KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 16, 2017, its status is phase 2.

Notes:

Product Updated to Phase 2 on 8/16/2017 Product has been sent to the New Products Review Committee (8/16/17). WPS

Trade Name: K72 Flexible Marker Post


Generic Name: Marker Post
This product is Not Patented

Manufacturer: eNdoto Corp.
Address: 43 Franklin St
	Hartford, Connecticut 06108

Background description of company and its products:
	Providing innovative products and idea for both pedestrian and traffic safety.
Recommended Uses-Primary: Miscellaneous
Recommended Uses-Alternate: Unknown
Outstanding Features or Advantages Claimed:
	The posts can withstand pulling and shearing forces, has a single point anchoring system and a rounded top with recessed collars. Used as lane dividers, middle lane markers, median markers, and dangerous turns and curves.
General Composition of Material:
	Polyethylene
Date introduced on Market: 2010-01-01
Alternate for Following Existing Product: Traffic cones/posts
Cost Per Unit Material (F.O.B.): $110.00
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided



This product meets requirements of following specifications:
	AASHTO: ASTM: D790, D1693 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	NO
This product is approved for use by other highway authorities or other agencies:
	Contacts can be provided upon further request
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.endotocorp.com

This information is filed by Nicole Bolduc on Aug 02, 2017
Contact Information:
	eNdoto Corp.
	43 Franklin St
	East Hartford, Connecticut 06108
	Phone: 860-289-8033
	Email: nicole@endotocorp.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
K-72 Marker Posts Style-V2.pdf	application/pdf	204	876 Nicole Bolduc	eNdoto Corp.	Aug 02, 2017	4285	Yes
K72 Posts Installation-V1.pdf	application/pdf	15228	876 Nicole Bolduc	eNdoto Corp.	Aug 02, 2017	4286	Yes
K72 Round post-Cover.pdf	application/pdf	216	876 Nicole Bolduc	eNdoto Corp.	Aug 02, 2017	4283	Yes
Style post K72.pdf	application/pdf	5303	876 Nicole Bolduc	eNdoto Corp.	Aug 02, 2017	4284	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

Maintenance	111 Rusty Wallace Agency	U Undecided		Sep 20, 2017	1972
KYTC	592 Tim Tharpe Agency	Y Approve	This product appears to have relevant use provided the dimensions can conform to Cabinet standards. It should be compared to other similar products that have been approved for use on our highways.	Aug 21, 2017	1961

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.