KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Oct 18, 2021, its status is phase 4.

Notes:

Phase updated to Phase II on 10/31/2016 Product has been sent to the New Products Review Committee (10/31/16). WPS After review, product phase may have been lost during transformation of KyPEL platforms. will resend to review personnel. 4/20/17. WPS I just got information from Chemistry (SR) (unofficially) on 5/24/2017 that this product failed when tested back in October 2016. because of the failure, this product is being placed in Phase 13. 5/25/2017 (WPS) Product has had additional comments submitted by Review Committee. Log into KyPEL to review. (7/8/19) - BSMITH Phase correction for product. This product should be shown in Phase 4, Experimental from email correspondence from Construction dated 9/11/2019. (10/18/2021) - BSMITH

Trade Name: HPS-8


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
(GLOBAL) 884900 Formula_ 884900 THERMO 20 5_19_2015 12_37_50	application/pdf	400	804 William Semones	KYTC	Oct 31, 2016	3939	Yes
(GLOBAL) 884901 Formula_ 884901 THERMO 14 5_19_2015 12_26_59	application/pdf	400	804 William Semones	KYTC	Oct 31, 2016	3940	Yes
(GLOBAL) 884910 Formula_ 884910 THERMO 4 6_30_2015 11_10_56	application/pdf	394	804 William Semones	KYTC	Oct 31, 2016	3941	Yes
884900 884901 884910 HPS-8_Warranty.pdf	application/pdf	103	804 William Semones	KYTC	Oct 31, 2016	3942	Yes
884900 884901 884910_ProductDataSheet-HPS8-Extrude 10-16.ppt	application/vnd.open	173	804 William Semones	KYTC	Oct 31, 2016	3943	Yes
HPS-8_Brochure.pdf	application/pdf	694	804 William Semones	KYTC	Oct 31, 2016	3944	Yes
RE Change order item.msg	application/octet-stream	2012	978 Buan Smith	KYTC Division of Materials	Sep 16, 2019	5118	Yes
Specification_HPS-8_generic.pdf	application/pdf	434	804 William Semones	KYTC	Oct 31, 2016	3945	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC Division of Materials	978 Buan Smith Agency	Y Approve	Through a consensus of Construction and the Chemistry Section of Material this product is recommended for Experimental per manufactures specification. It should be evaluated as and alternative to Durable Pavement Marking Type I Tape.	Sep 16, 2019	2461
KYTC Division of Materials	978 Buan Smith Agency	Y Approve	Through a consensus of Construction and the Chemistry Section of Material this product is recommended for Experimental. It should be evaluated as and alternative to Durable Pavement Marking Type I Tape.	Sep 16, 2019	2460
KYTC	567 Brandi Mitchell Agency	U Undecided	This product is currently being used experimentally on projects. Laboratory analysis shows issue with the yellow color. Retroreflectivity data has not been supplied to this office.	Jul 05, 2019	2384

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name:
This product is Not Patented

Manufacturer: Ennis-Flint, Inc.
Address: 115 Todd Court
	Thomasville, NC 27360

Background description of company and its products:
	Ennis-Flint is the leading pavement marking manufacturer in North America and the world with 21 manufacturing locations in 5 continents. Products include traffic paint, thermoplastic, RPMs, epoxy, MMA, preformed thermoplastic, and integrated multipolymer
Recommended Uses-Primary: Pavement Marking*
Recommended Uses-Alternate: Bituminous Rejuvenators and Preservative Treatments
Outstanding Features or Advantages Claimed:
	HPS-8 offers the durability of plural component products, yet its\\\'' 50% intermix of type I and III beads provides long-term retro. HPS-8 can be applied using standard thermoplastic equipment.
General Composition of Material:
	A series of polymers complemented by resin, pigment, glass beads, and fillers.
Date introduced on Market: 2014-12-02
Alternate for Following Existing Product: Tape or Plural Components
Cost Per Unit Material (F.O.B.): $0.97
Royalty Cost: $0.00
Cost Per Unit in Place: $1.26

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 3 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:

This product has/is being evaluated by following Highway authorities or agencies:
	HPS-8 is currently under active evaluation in the following states... AL, FL, GA, IL, KS, LA, MI, MO, NH, and TX.
This product is approved for use by other highway authorities or other agencies:
	Right now all experimental
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: ennisflintamericas.com

This information is filed by Scott Seeley on Oct 14, 2016
Contact Information:
	Manufacturer
	115 Todd Court
	Thomasville, NC 27360
	Phone: 800-331-8118
	Email: devangelista@flinttrading.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us