KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Apr 19, 2017, its status is phase 10.

Notes:

Phase updated on 10/4/2016 Product has been sent to the New Products Review Committee (10/4/16). WPS Updated to Phase 10 as per acceptable NTPEP and local test data on 4/19/2017. Will also be placed on the LAM. WPS

Trade Name: Planitop X


Generic Name: N/A
This product is Patented

Manufacturer: MAPEI
Address: 1144 E Newport Center Drive
	Deerfield Beach, FL 33442

Background description of company and its products:
	Founded in Milan in 1937, MAPEI is today's world leader in the production of adhesives and chemical products for building. In the 1960s, MAPEI put its strategy of internationalization into action in order to have maximum proximity to the needs of local ma
Recommended Uses-Primary: Concrete Patching Material
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	Planitop X is easy to use, requiring only the addition of potable water. fast setting, to reduce downtime & expedite return to service, excellent compressive & flexural strength. Trowel applied mortar, offering exceptional sculptability after initial set, strong bond to existing properly prepared concrete And is shrinkage compensated.
General Composition of Material:
	Planitop X is a one component, fiber reinforced, shrinkage compensated, high early strength, fast setting, polymer modified, high build cementitious, repair mortar with a corrosion inhibitor.
Date introduced on Market: 2003-11-04
Alternate for Following Existing Product: Master Emaco N423 RS- Sika Repair 223
Cost Per Unit Material (F.O.B.): $24.43
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 14 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: Attached Data ASTM: Attached Data Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Illinois:217-782-6117 Nebraska:402-479-4752 North Carolina:919-329-4090 Virginia: 804-328-3135
This product is approved for use by other highway authorities or other agencies:
	Illinois, Nebraska, North Carolina, Virginia have Planitop X have on their QPL as routine.
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: www.mapei.com

This information is filed by Bruce Haller on Aug 24, 2016
Contact Information:
	MAPEI
	1144 E Newport Center Drive
	Deerfield Beach, FL 33442
	Phone: 9542468520
	Email: bhaller@mapei.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	528 Wesley Glass Agency	U Undecided	Product results in NTPEP appear acceptable. Product received in the Materials Lab and in test.	Oct 27, 2016	1884

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.