KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Mar 10, 2017, its status is phase 10.

Notes:

Updated to Phase III on 7/19/2016 Product is under detailed laboratory and/or literature review by the New Product Review Committee. Admixture requires testing before proceeding. (WPS) Admixture Test results complete on 1-31-2017 and passed. Specs exist so product will be placed in Phase 10. 3/10/2017 WPS

Trade Name: FinishEase-NC-Type G


Generic Name:
This product is Not Patented

Manufacturer: RussTech
Address: 11208 Decimal Drive
	Louisville, KY 40299

Background description of company and its products:
	Kentucky based manufacturer of chemical admxitures
Recommended Uses-Primary: Concrete Admixtures*
Recommended Uses-Alternate: Concrete Admixtures*
Outstanding Features or Advantages Claimed:
	Increased workability and finishability without extending set time,superior finishing characteristics for flatwork, walls, curb and tilt-up ,better retention of slump than conventional water-reducers
General Composition of Material:
	chemical admixture for concrete
Date introduced on Market: 2016-06-30
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 0 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M194 ASTM: C194 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	FinishEase-NC is currently approved for use as a Type A admixture - we are requesting additional approval as a Type G admixture
This product is approved for use by other highway authorities or other agencies:

Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page:

This information is filed by Kathi Showalter on Jun 30, 2016
Contact Information:
	manufacturer
	11208 Decimal Drive
	Louisville, KY 40299
	Phone: 502-267-7700
	Email: kathi@russtechnet.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
FinishEase-NC (Type G) 6-2-16.pdf	application/pdf	346	419 Kathi Showalter	manufacturer	Jun 30, 2016	3758	Yes
FINISHEASE-NC SDS.pdf	application/pdf	345	419 Kathi Showalter	manufacturer	Jun 30, 2016	3760	Yes
Finishease-NC.pdf	application/pdf	42	419 Kathi Showalter	manufacturer	Jun 30, 2016	3759	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	528 Wesley Glass Agency	U Undecided	NTPEP tested. Sample provided to CO for testing.	Jul 19, 2016	1838

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us