KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 01, 2021, its status is phase 10.

Notes:

Phase update to Phase II on 6/29/2016 Product has been sent to the New Products Review Committee (6/29/2016). WPS Product has been moved to Phase IV- Approved for experimental use on KYTC projects. No specification or special note exists. Contact KYTC prior to use. (8/15/16) WPS UPDATE: Product was added to the LAM in 2020. (7/1/2021) - BSMITH

Trade Name: SHUR-FLEX Surface Mount Delineator


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
10A-Shur-Flex Surface Mt Del Handout.pdf	application/pdf	119	307 Kevin Hardy	Shur-Tite Products Inc.	Jun 27, 2016	3727	Yes
10C-Install Instr for Shur-Flex Surface Mt Del w-Pic .pdf	application/pdf	474	307 Kevin Hardy	Shur-Tite Products Inc.	Jun 27, 2016	3731	Yes
10J-S-F Surf Mt Del FHWA Cert.pdf	application/pdf	732	307 Kevin Hardy	Shur-Tite Products Inc.	Jun 27, 2016	3728	Yes
Shur-Flex Surface Mount #SF0140.pdf	application/pdf	42	307 Kevin Hardy	Shur-Tite Products Inc.	Jun 27, 2016	3729	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	Y Approve	This material has been added to the LAM.	Oct 26, 2020	2793
KYTC	616 Ryan Griffith Agency	Y Approve		Mar 13, 2018	2026
KYTC-Construction	815 Matt Looney Agency	Y Approve		Aug 04, 2016	1846
Maintenance	111 Rusty Wallace Agency	Y Approve		Jul 06, 2016	1818
KYTC	592 Tim Tharpe Agency	Y Approve	This product appears to have relevant use provided the dimensions can conform to Cabinet standards. It should be compared to other similar products that have been approved for use on our highways.	Jun 30, 2016	1813

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: Surface Mount
This product is Patented

Manufacturer: Shur-Tite Products Inc.
Address: PO box 2283
	Round Rock, TX 78680

Background description of company and its products:
	SHUR-TITEÂ® Products manufactures traffic safety products that are designed to emphasize maintenance cost savings.
Recommended Uses-Primary: Please Select ...
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	Omni directional, multiple impact design. Epoxy or bolt down capability Simple non mechanical design allows for easy post replacement Maintenance cost savings due to durability, minimizing change-outs
General Composition of Material:
	HDPE
Date introduced on Market: 2007-08-01
Alternate for Following Existing Product: Any surface mount delineator
Cost Per Unit Material (F.O.B.): $24.00
Royalty Cost: $0.00
Cost Per Unit in Place: $30.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 14 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: NTPEP ASTM: Fed. Spec.: KY: 838 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	NTPEP 2015 TTCD-2015-01-005
This product is approved for use by other highway authorities or other agencies:
	TDOT, ALDOT, MDOT, MODOT, ODOT, CALTRANS, NVDOT,NMDOT,CDOT, TXDOT,DOTD,FDOT,NDOR,KDOT,UDOT,NYSDOT,NJDOT, WYDOT,ADOT, AND OTHERS.
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: http://shur-tite.com/products/shur-flex-surface-mount-delineator/

This information is filed by Kevin Hardy on Jun 27, 2016
Contact Information:
	Shur-Tite Products Inc.
	PO box 2283
	Round Rock, TX 78680
	Phone: 512-966-9198
	Email: kevin@shur-tite.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.