KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 25, 2016, its status is phase 4.

Notes:

Product has been sent to the New Products Review Committee (5/3/16). Product Phase updated to IV on 7/25/2016. KyPEL was down at the time but Mr. Carpenters approval message is shown below: Verti-block walls have been reviewed and approval is recommended for use as non-reinforced gravity walls only. Geosynthetic reinforced retaining walls are not permitted at this time. For each wall submittal, the designer must present calculations and design drawings to the Geotechnical Branch for approval. Wall designs submitted to this branch must be completed using the LRFD design platform.

Trade Name: Verti-Block


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
MnDOT Verti-Block approval - gravity wall.pdf	application/pdf	53	777 Paul Filipiak	Foster Supply	May 02, 2016	3596	Yes
Nebraska DOT approval.pdf	application/pdf	103	777 Paul Filipiak	Foster Supply	May 02, 2016	3597	Yes
Sec_1_Design_Manual_VB_Gravity_Wall_2.0.pdf	application/pdf	2036	777 Paul Filipiak	Foster Supply	May 02, 2016	3594	Yes
Sec_2_Design_Manual_VB_Gravity_Wall_with_Mass_Extender_2.0.p	application/pdf	4129	777 Paul Filipiak	Foster Supply	May 02, 2016	3595	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	360 Michael Carpenter Agency	Y Approve	Verti-block walls have been reviewed and approval is recommended for use as non-reinforced gravity walls only. Geosynthetic reinforced retaining walls are not permitted at this time. For each wall submittal, the designer must present calculations and design drawings to the Geotechnical Branch for approval. Wall designs submitted to this branch must be completed using the LRFD design platform.	Aug 05, 2016	1849
KYTC	528 Wesley Glass Agency	U Undecided	Approve but will rely on Geotech review and recommendation as this product falls to their expertise. Concrete must come from a ready mix plant that is approved by Kentucky.	May 12, 2016	1736

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: precast modular retaining wall block
This product is Applied for Patent

Manufacturer: Foster Supply Inc.
Address: 912 Burgin Road
	Harrodsburg, Kentucky 40330

Background description of company and its products:
	Precast concrete manufacturer and construction material supply company in business since 1981. Currently operating two locations in Kentucky and three locations in West Virginia.
Recommended Uses-Primary: Barriers, Fencing and Roadside Structures
Recommended Uses-Alternate: Culverts and Drainage Structures
Outstanding Features or Advantages Claimed:
	Being one of the larger big block style retaining wall blocks, Verti-Block allows the construction of tall gravity retaining walls without the use of geosynthetic reinforcing. Geogrid can be used to build even taller walls. At 8 square feet of face per block, the larger block size results in lower installation costs and faster installations. The unique internal drainage system insures performance in that contractors must fill each unit with the appropriate amount of drainage stone. Verti-Block is a wet cast concrete product, avoiding many of the durability concerns associated with dry cast concrete retaining wall blocks. Finally, there are the aesthetic advantages that come with the random stone pattern and deep relief that are cast into the face of each Verti-Block unit.
General Composition of Material:
	KYTC Class A Concrete
Date introduced on Market:
Alternate for Following Existing Product: Redi-Rock, Recon
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 7 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
At Cost $120.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: LRFD Bridge Section ASTM: C1372, D6916 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Approved by the Nebraska and Minnesota DOTs. Under evaluation by the Utah, Maine and West Virginia DOTs.
This product is approved for use by other highway authorities or other agencies:
	Routine use by Nebraska and Minnesota DOTs.
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Districts 8, 11 and 12 Contact Date:

Product Web Page: www.verti-block.com

This information is filed by Paul Filipiak on May 02, 2016
Contact Information:
	Foster Supply
	9374 Teays Valley Road
	Scott Depot, West Virginia 25560
	Phone: 3045450097
	Email: paul@fostersupply.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us