KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 08, 2019, its status is phase 10.

Notes:

Product has been sent to committee for Review (3/25/16). email sent to vendor requesting a sample of this material for testing. (6/27/2016) WPS still have not received the requested sample by the vendor as of 7/29/16. will email him a reminder. if i don't hear back by 9/27/16, product will be removed. WPS Product was approved and placed on the List of Approved Materials in 2018 as a Category II Rebar Grout. (7/8/19) - BSMITH

Trade Name: HIT RE-100


Generic Name:
This product is Not Patented

Manufacturer: Hilti, Inc.
Address: 7250 Dallas Pkwy
	Plano, Texas 75024

Background description of company and its products:
	Hilti is the premier manufacturer of products for post installed anchoring products including adhesive products for threaded rod, rebar and smooth bar dowelling.
Recommended Uses-Primary: Adhesive
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	High bond strength, ease of use, automatic mixing
General Composition of Material:
	Two part epoxy meeting ASTM C881
Date introduced on Market:
Alternate for Following Existing Product: HTE 50
Cost Per Unit Material (F.O.B.): $2.00
Royalty Cost: $0.00
Cost Per Unit in Place: $10.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 1 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C881 Fed. Spec.: KY: Others: ICC-ES AC308
This product has/is being evaluated by following Highway authorities or agencies:
	Utah, Colorado, Arizona, Missouri, 15 others
This product is approved for use by other highway authorities or other agencies:
	Texas, Kansas, Iowa, Tennessee, Virginia
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: www.us.hilti.com

This information is filed by Peter Anderson on Mar 25, 2016
Contact Information:
	Hilti, Inc.
	7250 Dallas Parkway
	Plano, Texas 75024
	Phone: 9724035948
	Email: peter.anderson@hilti.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

123.xps	application/vnd.ms-x	4378	313 Michael T. Black, P.E.	KYTC	Mar 31, 2016	3549	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	Y Approve	This material was placed on the LAM as a Rebar Grout - Category II in 2018.	Jul 05, 2019	2383
KYTC	528 Wesley Glass Agency	Y Approve	Specification exist. Appears independent data meets C881 as required. Although Type I and Type II will likely not be considered as KY specs do not utilize Type I and Type II C881 epoxies. Specs would require submission of a sample to the Division of Materials Chemistry Section prior to inclusion on the List of Approved Materials.	Mar 28, 2016	1649

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us