KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 17, 2016, its status is phase 4.

Notes:

Product has been sent to the New Products Review Committee (5/6/16). WPS Phase updated on 6/17/2016 Product has been moved to Phase IV- Approved for experimental use on KYTC projects. No specification or special note exists. Contact KYTC prior to us

Trade Name: Inland Waters Pollution Control, Inc


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

EcoCast Project History 5 4 15.doc	application/msword	1177	743 Connor Collier	IPR Great Lakes	May 11, 2015	3284	Yes
Milliken GeoSpray Storm Water Specification.pdf	application/pdf	523	743 Connor Collier	IPR Great Lakes	May 11, 2015	3283	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

Transportation Cabinet	613 Richard Thomas Agency	Y Approve	This method of storm sewer rehabilitation appears to be a cost effective alternative to replacing pipe. Further research is recommended.	Nov 06, 2019	2564
kytc	513 Ron Matar Agency	Y Approve	District 6 has used this product satisfactorily.	Jun 07, 2016	1785
KYTC	572 Doug Gesso Agency	Y Approve	Presentation at NTPEP conference on 5/11/2016 by Millikan. Research indicates beneficial applications for the appropriate conditions.	May 13, 2016	1742
KYTC	616 Ryan Griffith Agency	Y Approve	District 6 (Campbell County project) has used this product. The results were favorable and the district was satisfied.	May 13, 2016	1738
KYTC - State Highway Engineer's Office	663 Jonathan Wilcoxson Agency	U Undecided	Would like to see demo. Would like to see demo.	May 08, 2016	1682

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name:
This product is Not Patented

Manufacturer: Inland Pipe Rehabilitation, LLC
Address: 2002 Timberloch Place Suite 550
	The Woodlands, TX 77380

Background description of company and its products:
	For the last 30 years, trenchless rehabilitation technologies - which allow for the completion of underground repair or replacement projects with minimal surface and environmental disruption - have steadily gained ground on traditional "dig and replace" m
Recommended Uses-Primary: Culverts and Drainage Structures
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	IPR's EcoCast system is cost effective to other solution methods on large diameter pipe. It is the only 'green' technically of its kind and provides a smaller environmental work area footprint for all projects. The geopolymer liner shall be designed to produces a liner with improved compressive and flexural strength, high adhesion to damp surfaces, lower permeability and increased resistance to aggressive chemical attack.
General Composition of Material:
	The geopolymer lining maerial shall be a micro-fiber reinforced ultra-dense geopolymer. This material provides a high strength fiber reinforced mortar specifically designed for ease of mechanical pumping, spraying and spin casting. The nano-ceramic geopolymer liner shall not clog heads of spray equipment.
Date introduced on Market:
Alternate for Following Existing Product: Cured in place pipe, slip lining, dig and replace pipe
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 0 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
At Cost $0.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C-39, C-469/469M-10, Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Virginia DOT, NJ Turnpike Authority, Connecticut DOT, Ohio DOT, Illinois DOT
This product is approved for use by other highway authorities or other agencies:
	Virginia DOT, NJ Turnpike Authority, Connecticut DOT, Ohio DOT, Illinois DOT
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: www.teamipr.com

This information is filed by Connor Collier on May 11, 2015
Contact Information:
	IPR Great Lakes
	2002 Timberloch Place Suite 550
	The Woodlands, TX 77380
	Phone: 2032412567
	Email: ccollier@teamipr.com