KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 17, 2016, its status is phase 4.

Notes:

Sent to Review committee on 6/7/2016. Updated to Phase II on 6/7/2016. Updated to Phase IV on 6/17/2016. Product has been moved to Phase IV- Approved for experimental use on KYTC projects. No specification or special note exists. Contact KYTC pri

Trade Name: PipePatch No-Dig Repair System


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
fpp_sales-tech_P0114_0_reduced.pdf	application/pdf	1646	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2957	Yes
NSF_SE10990.pdf	application/pdf	69	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2955	Yes
NSF_SE10990.pdf	application/pdf	69	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2959	Yes
NSF_Summer Resin Testing.pdf	application/pdf	142	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2960	Yes
NSF_Summer Resin Testing.pdf	application/pdf	142	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2956	Yes
S1E PP spec (02).pdf	application/pdf	347	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2958	Yes
S1E PP spec (02).pdf	application/pdf	347	683 Mike Moore	Source One Environmental, LLC	Apr 22, 2014	2954	Yes

Division	Reviewer	Recommendation	Date	Delete
Recommendations and Comments

KYTC-Construction	815 Matt Looney Agency	U Undecided	Aug 04, 2016	1847
Maintenance	111 Rusty Wallace Agency	Y Approve	Jun 16, 2016	1795
KYTC	616 Ryan Griffith Agency	Y Approve	Jun 15, 2016	1793

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: PipePatch
This product is Not Patented

Manufacturer: Source One Environmental, LLC
Address: 422 West Rising St.
	Davison, MI 48423

Background description of company and its products:
	Product was developed by Fernco, Inc (flexible coupling company) and became trademarked as PipePatch in 2001. From then until 2007, PipePatch became one of the most sought after trenchless point repair products in the world. In late 2008, the ownership
Recommended Uses-Primary: Culverts and Drainage Structures
Recommended Uses-Alternate: Structural Materials and Components
Outstanding Features or Advantages Claimed:
	PipePatch material arrives to the jobsite pre-measured for optimum consistency during the installation project. Resin is pre-bagged for consistency in every kit, and the fiberglass comes pre-measured for circumference so there is no guesswork at jobsite. Product is designed to fix virtually any type of pipe ranging from 1 1/2 - 36" in diameter in 2, 4, and in some sizes, 7 ft. lengths, and can also make repair in 90 degree radiuses. Finished product achieves a mechanical bond to the host pipe with a flexural modulus of 1,345,000 psi at 1/8" thick. Resin is designed to cure in the presence of water, thus allowing the product to stop active ground water iniltration on contact.
General Composition of Material:
	Material is comprised of 100% fiberglass (chopped strand and knitted biaxial composite) and is saturated with a sodium silicate resin (MDI polymer) which contains zero VOC's or styrene.
Date introduced on Market:
Alternate for Following Existing Product: Link Pipe, traditional excavation
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 2 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: F1216 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Product has been used to complete or remedy multiple projects with ODOT, INDOT, MDOT, NYDOT, NJDOT, FDOT, and PENNDOT
This product is approved for use by other highway authorities or other agencies:
	Typically this product is approved on a preliminary basis per the scope of the project. This is not something that a DOT would typically use in house.
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: www.s1eonline.com/pipepatch

This information is filed by Mike Moore on Apr 22, 2014
Contact Information:
	Source One Environmental, LLC
	422 West Rising St.
	Davison, MI 48423
	Phone: 810-347-5754
	Email: mmoore@s1eonline.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us