KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of May 03, 2018, its status is phase 11.

Notes:

Product has been used in D5. Product has been recommended and endorsed by MCL for Project in D-7 (Alumni Drive- file attached) as of 6/8/15. Product was placed in Phase 4 by Scott Phelps in 2011 and placed in Phase 4 by Michael Black in 2015. Product can be used on an experimental basis. 5-8-17 WPS Product updated to Phase 11 on 11/14/17. WPS Product installed in Frankfort April 20, 2018 (see pics 1-4 attached) - MBLACK (5/3/18).

Trade Name: Nyloplast


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
7001-110-011.pdf	application/pdf	130	804 William Semones	KYTC	Nov 14, 2017	4398	Yes
7002-110-107 A.pdf	application/pdf	102	804 William Semones	KYTC	Nov 14, 2017	4402	Yes
7002-110-110 A.pdf	application/pdf	105	804 William Semones	KYTC	Nov 14, 2017	4403	Yes
Double Curb Base Plate.pdf	application/pdf	345	804 William Semones	KYTC	Nov 14, 2017	4404	Yes
Drain Basin Installation Guide.pdf	application/pdf	1178	804 William Semones	KYTC	Nov 14, 2017	4399	Yes
INLET CAPACITY CHART DATA.pdf	application/pdf	31	804 William Semones	KYTC	Nov 14, 2017	4400	Yes
Inlet Capacity Charts - Nyloplast Castings.pdf	application/pdf	2291	804 William Semones	KYTC	Nov 14, 2017	4406	Yes
LRFD Basin Report.pdf	application/pdf	350	804 William Semones	KYTC	Nov 14, 2017	4397	Yes
Minimum Angle Chart.pdf	application/pdf	137	804 William Semones	KYTC	Nov 14, 2017	4401	Yes
Nyloplast_1.pdf	application/pdf	997	275 Scott Phelps	KYTC	Mar 01, 2011	1532	Yes
Nyloplast_2.pdf	application/pdf	904	275 Scott Phelps	KYTC	Mar 01, 2011	1533	Yes
USU DB Load Test Report.pdf	application/pdf	2997	804 William Semones	KYTC	Nov 14, 2017	4396	Yes
Wheel Load Details.pdf	application/pdf	801	804 William Semones	KYTC	Nov 14, 2017	4405	Yes

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name:
This product is Not Patented

Manufacturer: Advanced Drainage Systems, Inc.
Address: 11810 Heath Rd
	Chesterland, OH 44026

Background description of company and its products:
	Nyloplast is a division of Advanced Drainage Systems with manufacturing plants in Georgia, California, and Ohio. Products include Drain Basins, Inline Drains, Ductile Iron Castings, Fittings, Water Quality Products.
Recommended Uses-Primary: Culverts and Drainage Structures
Recommended Uses-Alternate: Structural Materials and Components
Outstanding Features or Advantages Claimed:
	Watertight pipe connections which eliminate soil migration, light weight and easy to use, can be easily modified in the field, withstand h-20 load rating, includes ductile iron frames and grates, and a long service life.
General Composition of Material:
	PVC body with ductile iron frame and grate.
Date introduced on Market: 2010-01-04
Alternate for Following Existing Product: Precast drainage basins
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 5 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: AASHTO H-10, H-25 ASTM: ASTM _D-3212, D3034, Fed. Spec.: N/A KY: N/A Others:
This product has/is being evaluated by following Highway authorities or agencies:
	MI, OH, IN, and many others.
This product is approved for use by other highway authorities or other agencies:
	AL, AZ, AR, CA, CO, DE, FL, GA, HI, ID, KS, LA, ME, MD, MS, NH, NJ, NY, NC, OR, PA, TN, TX, UT, VT, VA, WA, WV
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: KYDOT District #5 approved using Nylopla Contact Date:

Product Web Page: http://www.ads-pipe.com/en/product.asp?productID=117

This information is filed by Sandy Camargo on Jan 04, 2010
Contact Information:
	Advanced Drainage Systems, Inc.
	794 North Hurricane Hills
	Boston, Kentucky 40107
	Phone: 859-421-6429
	Email: sandy.camargo@ads-pipe.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us