KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Mar 29, 2010, its status is phase 4.

Notes:

Begin review 9/08

Trade Name: PolySpray FS250


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

PolySpray FS-250 TDS.pdf	application/pdf	78	59 Mike Fox	HydraTech Engineered Products, LLC	Sep 02, 2011	1833	Yes
PolySprayCulvert_RackCard.pdf	application/pdf	1680	59 Mike Fox	HydraTech Engineered Products, LLC	Sep 02, 2011	1832	Yes

Division	Reviewer	Recommendation	Comment	Response	Date	Delete
Recommendations and Comments

KYTC	32 David Quarles Agency	Y Approve	Product could be used succesfully where maintenance of traffic is a problem. I do not really know how often the Cabinet has found the level of deterioration that might warrant this product.		Oct 06, 2008	86
Maintenance	36 Wayne Simpson Agency	Y Approve	The only concern I have would be the cost of the product with our limited funds.		Oct 03, 2008	82
Ky Assoc. of Hwy Contractors	47 Michael LaRue Agency	Y Approve			Sep 29, 2008	80
KYTC D6	62 Robert Hill Agency	N/A	test test		Sep 26, 2008	77
KYTC D2	39 Brad Houck Agency	Y Approve	The product looks good but I see limited uses		Sep 10, 2008	69
KYTC D3	60 Greg Meredith Agency	Y Approve	I also can see limited use of this product. Each location would need to be vetted and only used where total replacement (say, in an urban area) would be too costly. I also would like to know the minimum diameter pipe that could be coated as well as length of remote coating capability. For example, could an 18" culvert pipe be treated 200 feet from entry point.	o answer Greg?s question; We prefer our minimum culvert diameter to be 36?. However, we have a hose length of 450 ft, so we could do a pipe that was 200 ft away, but in that circumstance there would be a maximum pipe length of 250ft. Thanks, Tera Disdier Business Development Coordinator Hunting SPecialized Products, Inc. Phone: 513 771 9319 x 130 Cell: 513 290 9675	Sep 08, 2008	67
KYTC D9	48 Phil Mauney Agency	Y Approve	Thank you for the answers regarding culvert and pipe conditions. Looks like a viable product depending on budgets.	To answer Phil's question - The culvert repair status and the ability to repair using PolySpray FS250 varies from case to case. Our product requires a sound surface so that the structural lining can be built in place via a spraying technique. As part of the surface preparation, we use a non shrink hydraulic cement to patch repair severely deteriorated culverts (missing invert and so on). Using this methodology has allowed us to repair severely deteriorated culverts. I have also included our PolySpray Install Procedure, there is a section on Culvert repair that may help explain the repair method in further details.	Sep 11, 2008	65
KYTC D1	41 Michael McGregor Agency	Y Approve	I think that we should try it to see if we like its performance.		Sep 03, 2008	64

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name: Polyurea structural lining
This product is Not Patented

Manufacturer: Hydratech Engineered Products
Address: 1210 Glendale Milford Rd
	Cincinnati, Ohio 45215

Background description of company and its products:
	Hunting Specialized Products provides cost effective solutions for the rehabilitation of deteriorated pipelines, storm drains, tanks, storage vessels and secondary containment areas. Our proven approach ensures the best solution to upgrade above ground
Recommended Uses-Primary: Culverts and Drainage Structures
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	A fully structural lining - Restores and enhances structural integrity of the system. Fast setting - cures in under 7 seconds for same day return to service. Good chemical resistance - resists most corrosive effluents. Excellent abrasion resistance - Excellent wear resistance and extends life of lined pipe. No hazardous waste - Contains no solvents and does not produce hazardous waste products.
General Composition of Material:
	PolySpray FS250 is a two component fast setting high build polyurea coating. The first component is an MDI based isocyanate and the second is a blend of polymeric amines.
Date introduced on Market: 2006-01-02
Alternate for Following Existing Product: Cut & replace, CIPP, slip lining
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 28 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
At Cost $0.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: F1216 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Virginia Department of Transportation, Virginia Transportation Research Council, Vermont Transportation Agency, Ohio Department of Transport.
This product is approved for use by other highway authorities or other agencies:
	Virginia Department of Transportation (routine), Vermont Transportation Agency (experimental).
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page:

This information is filed by Mike Fox on Aug 25, 2008
Contact Information:
	HydraTech Engineered Products, LLC
	10448 Chester Rd
	Cincinnati, Ohio 45215
	Phone: 513-827-9169
	Email: mike.fox@hydratechllc.com