KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Oct 25, 2021, its status is phase 4.

Notes:

Approved for experimental use. 9/17/04 This submittal was retrieved from Archive. (10/25/2021) - BSMITH

Trade Name: Geotac (Petrotac is a similar product)


Generic Name:
This product is Not Patented

Manufacturer: Crafco
Address: 6165 W. Detroit St.
	Chandler, AZ 85226

Background description of company and its products:
	Crafco is a manufacturer of pavement maintenance products an equipment covering a full range of hot and cold applied crack and joint sealants, patching materials and unique maintenance materials.
Recommended Uses-Primary: Waterproofing Membranes and Materials
Recommended Uses-Alternate: Adhesive
Outstanding Features or Advantages Claimed:
	Prevent damaging water permeation and penetration. Easily installed, cost effective.
General Composition of Material:
	SBS asphalt mastic applied to a noon-woven polyester geotextile.
Date introduced on Market:
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 0 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
At Cost $0.00 for Field Testing

This product meets requirements of following specifications:

This product has/is being evaluated by following Highway authorities or agencies:

This product is approved for use by other highway authorities or other agencies:

Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page:

This information is filed by Angie Hoaglin on Oct 10, 2007
Contact Information:
	Crafco
	6165 W. Detroit St.
	Chandler, AZ 85226
	Phone: 602-276-0406
	Email: angie.hoaglin@crafco.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
Geo_Brochure.pdf	application/pdf	681	141 Angie Hoaglin	Crafco	Jul 26, 2010	1010	Yes
Geotac Application Instructions.pdf	application/pdf	154	141 Angie Hoaglin	Crafco	Jul 26, 2010	1011	Yes
Geotac PDS.pdf	application/pdf	73	141 Angie Hoaglin	Crafco	Jul 26, 2010	1012	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	967 Josh Rogers Agency	Y Approve	This seems similar to the other product but since it's a roll, it would be better suited to try on a bridge deck. We do not use many asphalt overlays but this may be suited better for county bridges where they do.	Oct 26, 2021	3030
KYTC	32 David Quarles Agency	Y Approve	Similar to Petrotac which is in Ph IV. 9/04 I contacted company to update their info on 4/22/009. DQ	Apr 22, 2009	141

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us