KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 02, 2016, its status is phase 4.

Notes:

Product has been sent to the New Products Review Committee (3/15/16). Product has been moved to Phase IV- Approved for experimental use on KYTC projects. No specification or special note exists. Contact KYTC prior to use. (6/2/16) WPS

Trade Name: 1260 MG-KRETETM FLEX


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
1260 Mg-Krete Flex Part A.pdf	application/pdf	183	115 MIKE WALTERS	ALL SURFACE COATINGS LLC	Mar 12, 2016	3540	Yes
1260 Mg-Krete Flex.pdf	application/pdf	101	115 MIKE WALTERS	ALL SURFACE COATINGS LLC	Mar 12, 2016	3539	Yes
MGK summer 3 BAG MIX copy...pdf	application/pdf	72	115 MIKE WALTERS	ALL SURFACE COATINGS LLC	Mar 12, 2016	3542	Yes
MGK summer 3 BAG MIX copy..pages	application/octet-st	279	115 MIKE WALTERS	ALL SURFACE COATINGS LLC	Mar 12, 2016	3541	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	765 David Steele Agency	Y Approve	KYTC is always in need of a better concrete patching product especially if it can be used on horizontal surfaces, vertical surfaces, and overhead surfaces. Need to stress to the user the importance of wearing gloves, eye protection, and a NIOSH approved particle mask\respirator due to the hazards identified in the attachment. This product appears worthy of at least using on experimental applications.	Mar 22, 2016	1648
KYTC - State Highway Engineer's Office	663 Jonathan Wilcoxson Agency	Y Approve		Mar 21, 2016	1647
KYTC	528 Wesley Glass Agency	Y Approve	Based on information submitted, recommend approve use for experimental applications.	Mar 18, 2016	1644
KYTC	616 Ryan Griffith Agency	Y Approve		Mar 15, 2016	1640

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Generic Name:
This product is Not Patented

Manufacturer: ImcoÂ® Technologies Inc., 6254 Skyway Rd.,
Address: Smithville, ., Canada,
	Smithville, KY L0R 2A0

Background description of company and its products:
	IMCOÂ® products are uniquely formulated to extend the life of concrete â€¦ in the toughest of environments and under the harshest conditions. At IMCOÂ®, our products are created with one goal in mind: To vastly improve the performance of concrete acros
Recommended Uses-Primary: Concrete Patching Material
Recommended Uses-Alternate: Structural Materials and Components
Outstanding Features or Advantages Claimed:
	MG-KRETETM FLEX is designed specifically for anywhere movement and stress are of concern - such as airport runways, bridges, ramps, parking decks, highways and utilities. It is used for patching surface and deep pours. It can be poured into forms, it can be trowelled vertically and overhead. 1260 MG-KRETETM FLEX is designed to increase flexural and tensile strength.
General Composition of Material:
	Is a magnesium polyphosphate concrete repair material
Date introduced on Market: 2014-02-05
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $49.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 3 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:

This product has/is being evaluated by following Highway authorities or agencies:

This product is approved for use by other highway authorities or other agencies:
	W.V. DOH PENN DOT
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: info@imcotechnologies.com www.imcotechnologies.com

This information is filed by MIKE WALTERS on Mar 12, 2016
Contact Information:
	ALL SURFACE COATINGS LLC
	8101 Sawgrass Ct
	Louisville, KY 40291
	Phone: 5028170557
	Email: allsurfacecoating@yahoo.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2025 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us