KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 01, 2018, its status is phase 3.

Notes:

Product has been sent to the New Products Review Committee (5/16/18). Product has been reviewed and is awaiting laboratory testing. Product moved to Phase 3 (6/1/18) - MBLACK.

Trade Name: Dural HS Gel


Generic Name:
This product is Not Patented

Manufacturer: The Euclid Chemical Company
Address: 19320 Redwood Road
	Cleveland, Ohio 44110

Background description of company and its products:
	Euclid Chemical is a world leading manufacturer of specialty chemical products for the concrete and masonry construction industry.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	•Moisture insensitive - allowing installation and curing in damp environments •Withstands freeze-thaw conditions •Little to no odor •High modulus •Service temperature range between 35°F (2°C) and 180°F (82°C) •DOT Not Regulated (non-corrosive)
General Composition of Material:
	Part A - Epoxy Resins / Part B - Epoxy Hardeners
Date introduced on Market: 2018-04-01
Alternate for Following Existing Product: Ultrabond 1
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C881 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Product is PFR. (Purchase for Resale - Private Labeled)
This product is approved for use by other highway authorities or other agencies:
	IA.
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: www.euclidchemical.com/products/construction-products/bonding-agents-adhesives/

This information is filed by Brian Lewis on May 16, 2018
Contact Information:
	The Euclid Chemical Company
	19320 Redwood Road
	Cleveland, Ohio 44110
	Phone: 216-692-8305
	Email: blewis@euclidchemical.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	U Undecided	The Chemical section will include this product in the next round of testing for inclusion on the List of Approved Materials.	Jun 01, 2018	2119
KYTC	528 Wesley Glass Agency	U Undecided	This material is already recognized on the List of Approved Materials as Ultrabond 1, Adhesive Technologies. Although it appears under the listing of "Reinforcing Bar Grout Adhesive (non epoxy). This listing may not be appropriate if it is indeed a C881 epoxy. This submittal is a relabeled product. It can be sold under the relabeled name but it must be clearly labeled and identified by certification as Ultrabond 1 - the manufacturer. Dural Bond HS Gel has been revisited after discussions and determinations concerning relabeled products. It is appropriate to consider this product for inclusion on KY's LAM pending testing of product.	May 31, 2018	2117
KYTC	528 Wesley Glass Agency	N Disapprove	This material is already recognized on the List of Approved Materials as Ultrabond 1, Adhesive Technologies. Although it appears under the listing of "Reinforcing Bar Grout Adhesive (non epoxy). This listing may not be appropriate if it is indeed a C881 epoxy. This submittal is a relabeled product. It can be sold under the relabeled name but it must be clearly labeled and identified by certification as Ultrabond 1 - the manufacturer.	May 23, 2018	2109

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us