KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of May 16, 2018, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (5/16/18).

Trade Name: Stimsonite Model 201 Lens Cradle with C40 Replaceable Lens


Generic Name: Raised Pavement Marker
This product is Not Patented

Manufacturer: Ennis-Flint, Inc.
Address: 4161 Piedmont Parkway
	Greensboro, NC 27410

Background description of company and its products:
	Ennis-Flint, Inc. is a worldwide leader in the Traffic Safety Industry, with a legacy dating back to the beginning of road markings, and experience in providing all forms of pavement markings.
Recommended Uses-Primary: Raised Pavement Markers
Recommended Uses-Alternate: Temporary Traffic Control Devices*
Outstanding Features or Advantages Claimed:
	a.Polycarbonate casting is safer due to its lightweight design b.Dual tab design places the casting at the optimal depth to prevent snowplow blade hits while maintaining superior et night reflectivity c.Abrasion resistant coating provides enhanced retained reflectivity d.Advanced optics deliver high reflectivity and durability e.Initial SI values engineered to at least double ASTM standards f.Recommended for high ADT and high intensity conditions
General Composition of Material:
	Polycarbonate plastic
Date introduced on Market: 2016-10-01
Alternate for Following Existing Product: Stimsonite Model 101 iron casting
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 15 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: NA ASTM: D4280 Fed. Spec.: NA KY: NA Others: NA
This product has/is being evaluated by following Highway authorities or agencies:
	GADOT, ARDOT, NJDOT
This product is approved for use by other highway authorities or other agencies:
	MDSHA, OHDOT, (Model 201 Lens Cradle w/ C40 lens) ARDOT, Caltrans, NJDOT, NYDOT, OHDOT, OKDOT, PADOT, TXDOT (C40 replaceable lens Only)
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Ken Agen, Research Engineer Contact Date:

Product Web Page: https://www.ennisflintamericas.com/downloads/dl/file/id/38/product/0/brochure_ra

This information is filed by Dennis Evangelista on May 11, 2018
Contact Information:
	Manufacturer
	4161 Piedmont Parkway
	Greensboro, NC 27410
	Phone: 800-331-8118
	Email: devangelista@ennisflint.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us