KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 29, 2017, its status is phase 1.

Notes:

vendor was notified on 6/29/2017 that this product will need to go thru NTPEP evaluation before being accepted into KyPEL. It will remain in Phase 1 until NTPEP testing is complete or if there is no activity within the next year to date, it will be deleted from the system. (WPS)

Trade Name: NOFLOOD


Generic Name:
This product is Not Patented

Manufacturer: BMP PRODUCTS INC.
Address: 17061 Alico Commerce Ct
	Estero, FL 33967

Background description of company and its products:
	Manufacture of NOFLOOD storm drain filter, collects hydrocarbons, heavy metals, trash and sediment, we have been manufacturING for over 10 years.
Recommended Uses-Primary: Erosion Control Products*
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	The only filter on the market that won''''''''''''''''t flood, the filter has more flow than the grate sytem
General Composition of Material:
	All of our products are made with non-woven 11 oz xtex and 8 oz propex
Date introduced on Market: 2006-01-15
Alternate for Following Existing Product: Dandy, Flexstorm
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 5 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: see spec sheet Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Approved TNDOT, MSDOT, ILDOT, FLDOT, IN THE PROCESS ALDOT, GADOT, OHDOT,SCDOT, NCDOT, VADOT, INDOT, LOUISVILLE MSD.
This product is approved for use by other highway authorities or other agencies:
	LEE CO. FL. CITY OF BONITA SPRINGS, FL. ALPHA EMC BMP INSTALLER, PROTECTIVE BARRIERS BMP INSTALLER, MR. MULTI SERVICES BMP INSTALLER. LENNAR HOMES, PULTE HOMES, DR HORTON, TOLL BROTHERS, NEAL COMMUNITIES
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: LOUISVILLE MSD. Contact Date: April 19, 2017

Product Web Page: WWW.NOFLOOD.COM

This information is filed by Tab Downare on Jun 29, 2017
Contact Information:
	NoFlood, Inc.
	17061 Alico Commerce Ct
	Ft Myers, FL 33967
	Phone: 239-980-1644
	Email: tab@bmpproducts.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us