KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 02, 2018, its status is phase 2.

Notes:

Phase updated to Phase 2 on 4/4/2017 Product has been sent to the New Products Review Committee (4/4/17). WPS

Trade Name: Red Head A7+


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
A7+ HARDENER SDS.pdf	application/pdf	688	804 William Semones	KYTC	Jun 01, 2017	4200	Yes
A7+ Nelson Test Results C882.pdf	application/pdf	1176	804 William Semones	KYTC	Jun 01, 2017	4201	Yes
A7+ RESIN SDS.pdf	application/pdf	693	804 William Semones	KYTC	Jun 01, 2017	4202	Yes
DOT - BABA ITW CCNA letter to states.docx	application/docx	88	978 Buan Smith	KYTC Division of Materials	May 25, 2023	6414	Yes
ICC ESR-3903 (A7+ published concrete).pdf	application/pdf	839	804 William Semones	KYTC	Jun 01, 2017	4203	Yes
Red_Head_A7+_Brochure_02.2017.pdf	application/pdf	807	804 William Semones	KYTC	Jun 01, 2017	4204	Yes
Red_Head_A7+_Catalog_Q1.2017.pdf	application/pdf	3288	804 William Semones	KYTC	Jun 01, 2017	4205	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	U Undecided	Please submit a sample of this to Materials for testing.	Aug 29, 2018	2202

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


1.	Trade Name *	Generic Name
2.	Manufacturer*
	Address*		Yes No Applied for
	City*	Patented?
	State* Zip Code*
3.	Background description of company and its products*
	Red Head is a company with over a 100 years of history that focuses in manufacturing the best anchoring systems for concrete and masonry substrates. We possess two main product lines, adhesive/chemical anchoring and mechanical anchoring products.
4.	Recommended Uses-Primary*		Note: Categories with asterisk (*) require NTPEP Submittal. Vendor needs to obtain NTPEP Test results before submitting product to KYPEL.
5.	Recommended Uses-Alternate
6.	Outstanding Features or Advantages Claimed*
	High strength hybrid (vinyl ester) adhesive for rebar and threaded road anchoring to concrete and masonry substrates. Extensively tested, with approvals such as: - Installation in water filled holes and even underwater - Curing in cold temperatures (down to 14 F) - Competitive pricing - Quick cure - Cracked concrete and seismic approval - ICC ES reports for concrete and masonry
7.	General Composition of Material (Send Lab Report When Applicable)*
	10 part resin per 1 part hardener. Resin is mainly compressed of crystalline silica, hydroxypropyl methacrylate, and vinyl toluene. Hardener is compressed of ethylene glycol and dibenzoyl peroxide.
8.	Date introduced on Market*	Alternate for What Existing Product?
9.	Cost Per Unit Material? (F.O.B.) $	Royalty Cost? $
10.	Cost Per Unit in Place? $
11.	Material Specifications Furnished by Manufacturer? Yes No To Be Mailed
12.	Product Availability: Seasonal Non-Seasonal Delivery at Site Within Days after Receipt of Order
13.	Can Samples Be Provided? YesNo
	Free Or at Cost: $ For Laboratory Testing?
	Free Or at Cost: $ For Field Evaluation?
14.	Does product meet requirements of following specifications? (Give Specification No.)
	AASHTO ASTM Fed. Spec. KY Others
15.	Has product, or is product being evaluated by other Highway authorities or other agencies? (State by Whom)
	Yes, Transportation authorities include the DOTs of the following states: New York, Colorado, Ohio, New Jersey, Washington, Kansas, Missouri, Illinois, Wisconsin, Indiana, North Carolina, Georgia, and Pennsylvania
16.	Is product approved for use by other highway authorities or other agencies? (State by whom used and whether use is routine or experimental only and attach documentation (if available.)
	Yes, Transportation authorities that have approved our products include the DOTs of the following states: New York, Colorado, Ohio, New Jersey, Washington, Kansas, Missouri, Illinois, Wisconsin, Indiana, North Carolina, Georgia, and Pennsylvania
17.	Has another office of the Kentucky Department of Highways been contacted? YesNo
	Which office?	When?

18.	Product web page:

	* Required Fields

Product Submitter's Information:
Name: *
Filling Date: Tue, 28 Mar 2017 15:25:55 GMT
Organization: ITW Commercial Construction North America
Address: 155 Harlem Avenue, Glenview, Illinois 60025
Telephone Number: 630-694-4855
Email Address:


Generic Name: A7+
This product is Not Patented

Manufacturer: ITW Commercial Construction North America
Address: 700 High Grove Blvd
	GlendaleHeights, Illinois 60139

Background description of company and its products:
	Red Head is a company with over a 100 years of history that focuses in manufacturing the best anchoring systems for concrete and masonry substrates. We possess two main product lines, adhesive/chemical anchoring and mechanical anchoring products.
Recommended Uses-Primary: Epoxy and Resin Based Adhesive Bonding Systems
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	High strength hybrid (vinyl ester) adhesive for rebar and threaded road anchoring to concrete and masonry substrates. Extensively tested, with approvals such as: - Installation in water filled holes and even underwater - Curing in cold temperatures (down to 14 F) - Competitive pricing - Quick cure - Cracked concrete and seismic approval - ICC ES reports for concrete and masonry
General Composition of Material:
	10 part resin per 1 part hardener. Resin is mainly compressed of crystalline silica, hydroxypropyl methacrylate, and vinyl toluene. Hardener is compressed of ethylene glycol and dibenzoyl peroxide.
Date introduced on Market: 2017-03-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.):
Royalty Cost:
Cost Per Unit in Place:

Material Specifications Furnished by Manufacturer? No
Product Availability: Non-Seasonal , Delivery at Site Within 7 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
Free for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C881 Fed. Spec.: KY: Others: ICC ESR 3903
This product has/is being evaluated by following Highway authorities or agencies:
	Yes, Transportation authorities include the DOTs of the following states: New York, Colorado, Ohio, New Jersey, Washington, Kansas, Missouri, Illinois, Wisconsin, Indiana, North Carolina, Georgia, and Pennsylvania
This product is approved for use by other highway authorities or other agencies:
	Yes, Transportation authorities that have approved our products include the DOTs of the following states: New York, Colorado, Ohio, New Jersey, Washington, Kansas, Missouri, Illinois, Wisconsin, Indiana, North Carolina, Georgia, and Pennsylvania
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page: http://www.itwredhead.com/products/adhesive-anchors/a7

This information is filed by Guru Kumar on Mar 28, 2017
Contact Information:
	ITW Commercial Construction North America
	155 Harlem Avenue
	Glenview, Illinois 60025
	Phone: 630-694-4855
	Email: gkumar@itwccna.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us