KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 07, 2017, its status is phase 10.

Notes:

a email was sent to Derrick Castle on 2/22/2017 to remind him to send attachments. it was mentioned in the email that this product will not be evaluated without attachment. WPS Updated to Phase 2 on 6/2/2017.Product has been sent to the New Products Review Committee (6/2/17). Updated to Phase 10 on 6/7/2017. Product was added to the List of Approved Materials on 6/2/2017 after review by Michael Black. WPS

Trade Name: Zinc Clad DOT/ Fast Clad HB Acrylic


Generic Name: Inorganic Zinc/Acrylic
This product is Not Patented

Manufacturer: The Sherwin-Williams Company
Address: 809 Gunpowder Drive
	Lexington, KY 40509

Background description of company and its products:
	The Sherwin-Williams Company has produced quality paints and coatings for 150 years. Sherwin-Williams is the largest coatings manufacturer in North America.
Recommended Uses-Primary: Structural Steel Coatings*
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	Two coat inorganic zinc/acrylic structural steel coating system providing superior corrosion protection and color and gloss retention.
General Composition of Material:
	Inorganic zinc rich primer and high build waterborne acrylic finish coat.
Date introduced on Market: 2017-03-02
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? Yes
Product Availability: Non-Seasonal , Delivery at Site Within 0 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
Free for Laboratory Testing
At Cost $0.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: R-31 ASTM: Fed. Spec.: KY: 821 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Zinc Clad DOT/Fast Clad HB Acrylic has completed AASHTO/NTPEP testing under SSC 2011-01-005.
This product is approved for use by other highway authorities or other agencies:
	North Carolina and Kansas
No office of the Kentucky Department of Highways has been contacted yet.
	Contacted Office: Contact Date:

Product Web Page:

This information is filed by Derrick Castle on Feb 15, 2017
Contact Information:
	The Sherwin-Williams Company
	1834 Clintonville Road
	Paris, KY 40361
	Phone: 913-481-0612
	Email: Derrick.Castle@sherwin.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept

Attached Files for This Product

SW Letter - KYTC LAM Update 2-15-17.pdf	application/pdf	75	804 William Semones	KYTC	Jun 02, 2017	4206	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	313 Michael T. Black, P.E. Agency	Y Approve	Product has been submitted to NTPEP. Results have been reviewed and are acceptable. Product has been placed on the List of Approved Materials. (MBLACK - 06/02/17)	Jun 02, 2017	1936

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us