KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Feb 16, 2017, its status is phase 8.

Notes:

sent vendor email on 2/15/17 to contact Ted Swansegar of the KYTC division of traffic to discuss the use of this product. WPS

Trade Name: GovComm, Inc.


Generic Name:
This product is Not Patented

Manufacturer: GovComm, Inc.
Address: 2650 Biscayne Blvd
	Miami, FL 33137

Background description of company and its products:
	GovComm ITS equipment is ISO 9001 manufactured and developed, then laboratory tested ensuring that a series of standards that define, establish and maintain an effective quality assurance system is in place to guarantee our customers receive the highest q
Recommended Uses-Primary: Miscellaneous
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	GovCommâ€™s highly-available Intelligent Transportation Camera Systems aide commuters by providing high-definition video imagery to traffic management centers. Our ITS cameras provide crystal clear resolution in daylight, low-light, no-light, heavy rain, snow and dense fog conditions at distances up to six miles. GovComm ITS cameras are hardened for extreme temperatures (-40Â°C to +75Â°C), resistant to electrical transients, vibration, shock, anti-thunder, anti-surge (TVS 6,000 Volts) , anti-static, certified by an independent laboratory to be NEMA TS2 compliant and resilient against category 5 hurricane force winds. Our ITS cameras are fluent in NTCIP which is a family of standards that provides both the rules for communicating (protocols) and the vocabulary (objects) necessary to allow electronic traffic control equipment from different manufacturers to operate with each other as a system. We support an API development interface, CGI, PSIA, ISAPI protocol access and are Open Network Video Interface Forum (ONVIF) profile S and G compliant. GovComm ITS cameras are available in a variety of configurations including fixed dome, speed dome and bullet with motorized varifocal lenses, infra-red illuminators and smart technology.
General Composition of Material:
	TexasÂ InstrumentsÂ DaVinciÂ videoÂ processor,Â CMOSÂ progressiveÂ scanÂ imageÂ sensor,Â motorizedÂ zoomÂ lens,Â motorizedÂ panÂ andÂ tiltÂ andÂ cameraÂ assembly.
Date introduced on Market: 2012-02-07
Alternate for Following Existing Product: Traffic Monitoring Cameras
Cost Per Unit Material (F.O.B.): $2500.00
Royalty Cost: $0.00
Cost Per Unit in Place: $2500.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 30 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: N/A ASTM: N/A Fed. Spec.: N/A KY: N/A Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Yes, Florida and Georgia Departments of Transportation
This product is approved for use by other highway authorities or other agencies:
	Yes, Florida Department of Transportation. MoreÂ thanÂ 1,000Â ITSÂ camerasÂ areÂ deployedÂ byÂ theÂ FloridaÂ DepartmentÂ ofÂ Transportation.
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: http://govcomm.us/

This information is filed by James Reskin on Feb 13, 2017
Contact Information:
	GovComm
	2650 Biscayne Blvd
	Miami, FL 33137
	Phone: 3059372000
	Email: jreskin@govcomm.us

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us