KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Nov 02, 2016, its status is phase 6.

Notes:

Will hold in Phase VI until NTPEP results are complete. 11/2/2016

Trade Name: Nedia SC400


Generic Name: straw/coconut erosion control blanket
This product is Not Patented

Manufacturer: Nedia Enterprises, Inc.
Address: 44675 Cape Court, Suite 120
	Ashburn, Virginia 20147

Background description of company and its products:
	Nedia Enterprises offers a complete line of erosion control, sediment control and bioengineering products made primarily from natural fibers. We provide innovative quality products and excellent service to our customers in the erosion control and bioengin
Recommended Uses-Primary: Please Select ...
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	70% straw and 30% coconut stitched blankets for erosion control on slopes and channels. It helps to stabilize and reinforce the soil until vegetation is established. It can be used on 2:1 to 1:1 slopes and in channels with moderate to severe flow conditions.
General Composition of Material:
	Nedia SC400 is a 70% straw / 30% coconut fiber matrix stitch bonded between heavyweight photodegradable top netting and a light weight photodegradable polypropylene bottom netting.
Date introduced on Market:
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.62
Royalty Cost: $0.00
Cost Per Unit in Place: $1.22

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 5 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
At Cost $0.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: D6475,D6525,D6818,D6 Fed. Spec.: KY: 827.07 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	New York State DOT Peter.Dunleavy@dot.ny.gov Virginia DOT Scott.Crafton@vdot.virginia.gov Arizona DOT Stephanie Huang 6027126430
This product is approved for use by other highway authorities or other agencies:
	West Virginia DOH Greg Bradford 304 558 9882 Utah DOT Tim Wozab Alaska DOT chris@alaskanet.com
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: N/A Contact Date:

Product Web Page: http://www.nedia.com/products/erosion_control.html

This information is filed by Siby Pothen on Nov 01, 2016
Contact Information:
	Nedia Enterprises, Inc.
	44675 Cape Court, Suite 120
	Ashburn, Virginia 20147
	Phone: 5712330200
	Email: zwang@nedia.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Currently there are no recommendations at this time.

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us