KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 03, 2018, its status is phase 10.

Notes:

Phase updated to Phase II on 10/31/2016 Product has been sent to the New Products Review Committee (10/31/16). WPS Product moved to Phase X (8/3/18) and has been added to the List of Approved Materials. - MBLACK

Trade Name: Eucon Stasis


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
CADD 2015-01-116_Eucon Stasis Type D_6 mo. Report.pdf	application/pdf	123	305 Brian Lewis	The Euclid Chemical Company	Oct 14, 2016	3932	Yes
Eucon Stasis Submittal Letter 10-14-16.pdf	application/pdf	464	305 Brian Lewis	The Euclid Chemical Company	Oct 14, 2016	3927	Yes
NTPEP - Eucon Stasis.pdf	application/pdf	117	305 Brian Lewis	The Euclid Chemical Company	Oct 14, 2016	3931	Yes
SDS - Eucon_Stasis.pdf	application/pdf	151	305 Brian Lewis	The Euclid Chemical Company	Oct 14, 2016	3930	Yes
TDS - Eucon_Stasis.pdf	application/pdf	106	305 Brian Lewis	The Euclid Chemical Company	Oct 14, 2016	3929	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	313 Michael T. Black, P.E. Agency	Y Approve	Product moved to Phase X (8/3/18) and has been added to the List of Approved Materials.	Aug 03, 2018	2175
KYTC	528 Wesley Glass Agency	U Undecided	This product has not completed NTPEP testing (F/T testing is in progress). Sample of Eucon Stasis is requested.	Dec 16, 2016	1895
KYTC	528 Wesley Glass Agency	U Undecided	This product has not completed NTPEP testing (F/T testing is in progress).	Oct 31, 2016	1887

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


1.	Trade Name *	Generic Name
2.	Manufacturer*
	Address*		Yes No Applied for
	City*	Patented?
	State* Zip Code*
3.	Background description of company and its products*
	The Euclid Chemical Company is a global provider of demonstratively better products and services to the concrete and masonry construction industries. Backed by an ISO 9001:2000 registration that ensures quality products and dependable service, Euclid Chem
4.	Recommended Uses-Primary*		Note: Categories with asterisk (*) require NTPEP Submittal. Vendor needs to obtain NTPEP Test results before submitting product to KYPEL.
5.	Recommended Uses-Alternate
6.	Outstanding Features or Advantages Claimed*
	â€¢ Eliminates the need to use 200 to 300 gal (757 to 1136 liter) of water to wash-out versus 50 gal (189 lL) with EUCON STASIS â€¢ Environmental hazards are reduced because wash-out water is used as batch water for the next load of concrete rather than discharging into settling ponds â€¢ Wash-out time is decreased due to the rapid cleansing action of the proprietary ingredients in EUCON STASIS â€¢ Saves wash-out water â€¢ Protects the environment â€¢ Eliminates wash-out pits â€¢ Reduces clean-up time â€¢ Superior set retardation â€¢ Reduces water requirements â€¢ Retains slump life for 2 hours or more
7.	General Composition of Material (Send Lab Report When Applicable)*
	Sodium hydroxide, p-Dioxane
8.	Date introduced on Market*	Alternate for What Existing Product?
9.	Cost Per Unit Material? (F.O.B.) $	Royalty Cost? $
10.	Cost Per Unit in Place? $
11.	Material Specifications Furnished by Manufacturer? Yes No To Be Mailed
12.	Product Availability: Seasonal Non-Seasonal Delivery at Site Within Days after Receipt of Order
13.	Can Samples Be Provided? YesNo
	Free Or at Cost: $ For Laboratory Testing?
	Free Or at Cost: $ For Field Evaluation?
14.	Does product meet requirements of following specifications? (Give Specification No.)
	AASHTO ASTM Fed. Spec. KY Others
15.	Has product, or is product being evaluated by other Highway authorities or other agencies? (State by Whom)
	CO, CT, FL, IL, IN, OH, TX, WA, WI, WV.
16.	Is product approved for use by other highway authorities or other agencies? (State by whom used and whether use is routine or experimental only and attach documentation (if available.)
	CO, CT, FL, IL, IN, OH, TX, WA, WI. (Routine)
17.	Has another office of the Kentucky Department of Highways been contacted? YesNo
	Which office?	When?

18.	Product web page:

	* Required Fields

Product Submitter's Information:
Name: *
Filling Date: Fri, 14 Oct 2016 12:29:37 -0400
Organization: The Euclid Chemical Company
Address: 19320 Redwood Road, Cleveland, Ohio 44110
Telephone Number: 216-692-8305
Email Address:


Generic Name:
This product is Not Patented

Manufacturer: The Euclid Chemical Company
Address: 19320 Redwood Road
	Cleveland, Ohio 44110

Background description of company and its products:
	The Euclid Chemical Company is a global provider of demonstratively better products and services to the concrete and masonry construction industries. Backed by an ISO 9001:2000 registration that ensures quality products and dependable service, Euclid Chem
Recommended Uses-Primary: Please Select ...
Recommended Uses-Alternate: Please Select ...
Outstanding Features or Advantages Claimed:
	â€¢ Eliminates the need to use 200 to 300 gal (757 to 1136 liter) of water to wash-out versus 50 gal (189 lL) with EUCON STASIS â€¢ Environmental hazards are reduced because wash-out water is used as batch water for the next load of concrete rather than discharging into settling ponds â€¢ Wash-out time is decreased due to the rapid cleansing action of the proprietary ingredients in EUCON STASIS â€¢ Saves wash-out water â€¢ Protects the environment â€¢ Eliminates wash-out pits â€¢ Reduces clean-up time â€¢ Superior set retardation â€¢ Reduces water requirements â€¢ Retains slump life for 2 hours or more
General Composition of Material:
	Sodium hydroxide, p-Dioxane
Date introduced on Market:
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 1 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: M194 ASTM: C494 Fed. Spec.: KY: 802.01.02 Others:
This product has/is being evaluated by following Highway authorities or agencies:
	CO, CT, FL, IL, IN, OH, TX, WA, WI, WV.
This product is approved for use by other highway authorities or other agencies:
	CO, CT, FL, IL, IN, OH, TX, WA, WI. (Routine)
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: www.euclidchemical.com

This information is filed by Brian Lewis on Oct 14, 2016
Contact Information:
	The Euclid Chemical Company
	19320 Redwood Road
	Cleveland, Ohio 44110
	Phone: 216-692-8305
	Email: blewis@euclidchemical.com


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us