KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Aug 15, 2016, its status is phase 8.

Notes:

Updated to Phase VIII on 8/15/16. See Ted's comments from the other two Migma Products which were also placed in Phase VIII. (WPS)

Trade Name: MigmaIntersection


Generic Name:
This product is Not Patented

Manufacturer: Migma Systems, Inc.
Address: 1600 Boston Providence Hwy
	Walpole, MA 02081

Background description of company and its products:
	MigmaIntersection is a sophisticated pedestrian detector with interface to APS pushbuttons for locator tone triggering and automated pushbutton actuation. It can also be used for pedestrian walk-time extension to allocate sufficient time for pedestrian
Recommended Uses-Primary: Unknown
Recommended Uses-Alternate: Unknown
Outstanding Features or Advantages Claimed:
	Uses a high resolution IR LED stereo camera with analytical video cueing and 3D pattern recognition. Pedestrian detection algorithms using stereo vision analysis for pedestrian detection both day and night (total darkness)and all weather conditions. Interface with flasher and traffic controller with relay output voltage from 12 - 24VDC.
General Composition of Material:
	One SBC (single board computer), Two stereo cameras w/waterproof connectors.
Date introduced on Market: 2010-05-01
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 30 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
At Cost $2700.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: Fed. Spec.: MUTCD KY: Others: FHWA
This product has/is being evaluated by following Highway authorities or agencies:
	MigmaIntersectionâ„¢ has been submitted to all states who have the NPE program.
This product is approved for use by other highway authorities or other agencies:
	Approved by: Idaho DOT Maine DOT Mass DOT Nebraska DOT Oklahoma DOT Pennsylvania DOT
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: http://migmapd.com/migmaintersection.htm

This information is filed by Erin Wheaton on Jul 08, 2016
Contact Information:
	Migma Systems, Inc.
	1600 Boston Providence Hwy
	Walpole, MA 02081
	Phone: 508-660-0328
	Email: ewheaton@migmasys.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	405 Ted Swansegar Agency	U Undecided	They need to come and meet us so we could see what is actually is!!	Aug 09, 2018	2183

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us