KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Feb 14, 2023, its status is phase 13.

Notes:

Phase updated on 5/18/2016 Product has been sent to the New Products Review Committee (5/18/16). WPS Phase updated on 6/3/2016 Product has been updated to Phase XIII. Product has not been approved for use in Kentucky highway or bridge constructio

Trade Name: J-J Hooks MASH


Generic Name: restrained precast concrete temporary barrier
This product is Patented

Manufacturer: Easi-Set Worldwide
Address: 5119 Catlett Rd.
	Midland, VA 22728

Background description of company and its products:
	Licensor of precast concrete products
Recommended Uses-Primary: Barriers, Fencing and Roadside Structures
Recommended Uses-Alternate: Barriers, Fencing and Roadside Structures
Outstanding Features or Advantages Claimed:
	MASH TL3 tested Lowest deflection in pinned and bolted installations
General Composition of Material:
	Steel-reinforced precast concrete
Date introduced on Market:
Alternate for Following Existing Product: KYDOT restrained barrier standard
Cost Per Unit Material (F.O.B.): $700.00
Royalty Cost: $42.00
Cost Per Unit in Place: $700.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 0 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $700.00 for Laboratory Testing
At Cost $700.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: MASH TL3 ASTM: Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	Requests for Approval as an Alternate submitted to all states and many Canadian provinces
This product is approved for use by other highway authorities or other agencies:
	Approved as an Alternate by 22 states
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: www.jjhooks.com

This information is filed by Moffette Tharpe on May 16, 2016
Contact Information:
	Easi-Set Worldwide
	5119 Catlett Rd.
	Midland, VA 22728
	Phone: 484-256-0001
	Email: mtharpe@easiset.com


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
B 52B - FHWA Eligibllity Letter - Bolted 12-20-2012.pdf	application/pdf	1477	810 Moffette Tharpe	Easi-Set Worldwide	May 16, 2016	3614	Yes
B 52C - FHWA Eligibility Letter - Pinned 12-20-2012.pdf	application/pdf	1467	810 Moffette Tharpe	Easi-Set Worldwide	May 16, 2016	3615	Yes
J-J Hooks DOT MASH Flyer.pdf	application/pdf	2384	810 Moffette Tharpe	Easi-Set Worldwide	May 16, 2016	3613	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	616 Ryan Griffith Agency	N Disapprove		Jun 03, 2016	1781
Maintenance	111 Rusty Wallace Agency	U Undecided	Not sure if this meets all design criteria.	Jun 03, 2016	1776
KYTC	641 Bill Gulick Agency	N Disapprove		Jun 02, 2016	1766

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us