KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jun 06, 2016, its status is phase 13.

Notes:

Product has been sent to the New Products Review Committee (4/29/16). Phase has been updated on 6/6/2016. See review comments Product has been updated to Phase XIII. Product has not been approved for use in Kentucky highway or bridge construction. (

Trade Name: Planitop 18


Generic Name:
This product is Not Patented

Manufacturer: MAPEI
Address: 1144 East Newport Center Drive
	Deerfield Beach, FL 33442

Background description of company and its products:
	Worldwide Manufacturer of construction products for repair and protection of concrete structures.
Recommended Uses-Primary: Concrete Patching Material
Recommended Uses-Alternate: Concrete Patching Material
Outstanding Features or Advantages Claimed:
	ASTM C 928 R# repair mortar that is flowable and "Very Rapid"
General Composition of Material:
	Cment and aggregates
Date introduced on Market: 2008-03-04
Alternate for Following Existing Product:
Cost Per Unit Material (F.O.B.): $0.00
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 3 Days after Receipt of Order
Can Samples Be Provided? Yes. Samples can be provided
At Cost $0.00 for Laboratory Testing
Free for Field Testing

This product meets requirements of following specifications:
	AASHTO: ASTM: C928 R3 Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	PADOT MADOT MEDOT
This product is approved for use by other highway authorities or other agencies:
	FDOT IDOT NCDOT
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: http://www.mapei.com/US-EN/Concrete-Restoration-Systems/Concrete-Repair-Mortars/

This information is filed by Andrew Fulkerson on Apr 27, 2016
Contact Information:
	MAPEI
	1144 East Newport Center Drive
	Deerfield Beach, FL 33442
	Phone: 954-246-8749
	Email: afulkerson@mapei.com

Currently there are not any attachments for this product screened by administrator, now.


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	528 Wesley Glass Agency	N Disapprove	The independent test data provided and also posted on NTPEP indicates unacceptable F/T durability factor and beam deterioration. KY experiences numerous F/T cycles. KY typically references F/T acceptability at a minimum of 80% durability. The limit can be found in regard to concrete aggregate acceptance in Section 805.04 of the KY Spec Book.	Jun 06, 2016	1784
KYTC	528 Wesley Glass Agency	N Disapprove	The independent test data provided and also posted on NTPEP indicates unacceptable F/T durability factor and beam deterioration.	Jun 01, 2016	1763

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.