KYPEL Product Details

This product has been reviewed by Division of Materials, Kentucky Transportation Cabinet. As date of Jul 13, 2016, its status is phase 2.

Notes:

Product has been sent to the New Products Review Committee (1/26/16). a message was sent to vendor on 7/13/2016 stating Brandi's recommendation. if i don't hear back from vendor in 90 days, this product will be taken out of KyPEL. (WPS)

Trade Name: DURADHESIVE


Attached Files for This Product

File Name	Type	Size (KB)	Uploaded By	Organization	Date	Agency Only	Accept	Delete
DURADHESIVE Independent Test Certification 2014.pdf	application/pdf	953	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Jan 11, 2016	3468	Yes
Duradhesive Part A SDS.pdf	application/pdf	357	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Jan 11, 2016	3471	Yes
Duradhesive Part B SDS Revision 1 Version 2 7.15.15.pdf	application/pdf	356	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Jan 11, 2016	3472	Yes
Duradhesive PDS.pdf	application/pdf	327	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Jan 11, 2016	3470	Yes
DURADHESIVE viscosity and storage stability.pdf	application/pdf	208	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Jan 11, 2016	3469	Yes
P3 Letter.pdf	application/pdf	42	782 Puneet Singh	P3 INFRASTRUCTURE, INC.	Jan 11, 2016	3473	Yes

Division	Reviewer	Recommendation	Comment	Date	Delete
Recommendations and Comments

KYTC	567 Brandi Mitchell Agency	Y Approve	Please submit this product to NTPEP with castings to be evaluated.	Mar 09, 2016	1635

NEW PRODUCTS EXPLANATION OF PHASES
Phase 1		Product has been submitted and is pending initial review by the chairman of the committee.
Phase 2		The product is under preliminary review by appropriate sections(s)/Division(s) and awaiting recommendations(s) to the chair from the appropriate section(s)/division(s). Minimal study of available literature is necessary at this stage.
Phase 3		Product is under detailed laboratory and/or literature review by the New Product Review Committee.
Phase 4		Product has been approved for experimental use by the New Product Review Committee. The product may be used on a limited basis; however, change orders must be submitted and approved prior to use of the product. The product will be monitored for performance for two years, but the performance period may be changed depending on the type of product and susceptibility to weathering. If the product performs poorly and poses a safety risk, the product may be removed before scheduled replacement.
Phase 5		The product has been approved for use by the New Products Review Committee. The contractor must have the product approved by the KYTC and the Federal Highway Administration (if applicable) prior to use of the product on a project. Standard Specifications or Special Notes are being developed for this type of material/product.
Phase 6		Current specifications exist for this type of product. It may be requested that the manufacturer submit samples, NTPEP test data, and/or provide requested information to have the product approved and placed on the List of Approved Materials (if applicable).
Phase 7		Product has been sent the New Product Review Committee for final approval consideration.
Phase 8		Not a product to be evaluated by the New Products Review Committee.
Phase 9		Specifications exist for product however, there is no List of Approved Materials for this type of product at this time. Product may be used provided it meets the required specification or special condition(s) listed.
Phase 10		Product has been approved and specifications or special note exists.
Phase 11		Product is approved for use however there is no KYTC specification or special note. Product must meet manufacturer specifications and must have KYTC approval before use.
Phase 12		Product has been experimentally approved previously and is currently under evaluation on select projects. Not permitted on future projects until field evaluations are complete.
Phase 13		Product not approved for use in Kentucky highway or bridge construction.


1.	Trade Name *	Generic Name
2.	Manufacturer*
	Address*		Yes No Applied for
	City*	Patented?
	State* Zip Code*
3.	Background description of company and its products*
	P3 is an innovative technology company that creates and manufactures coatings and adhesive polymer solutions. Our core philosophy at P3 is to utilize these durable, environmentally safe and proven applications to improve existing and new infrastructure co
4.	Recommended Uses-Primary*		Note: Categories with asterisk (*) require NTPEP Submittal. Vendor needs to obtain NTPEP Test results before submitting product to KYPEL.
5.	Recommended Uses-Alternate
6.	Outstanding Features or Advantages Claimed*
	âˆ™Solvent free âˆ™100 percent solids âˆ™Resistant to chemicals âˆ™Excellent adhesion to concrete and asphalt âˆ™Rapid return to service
7.	General Composition of Material (Send Lab Report When Applicable)*
	EPOXY RESIN AND AMINE BASED HARDENER (CATALYST)
8.	Date introduced on Market*	Alternate for What Existing Product?
9.	Cost Per Unit Material? (F.O.B.) $	Royalty Cost? $
10.	Cost Per Unit in Place? $
11.	Material Specifications Furnished by Manufacturer? Yes No To Be Mailed
12.	Product Availability: Seasonal Non-Seasonal Delivery at Site Within Days after Receipt of Order
13.	Can Samples Be Provided? YesNo
	Free Or at Cost: $ For Laboratory Testing?
	Free Or at Cost: $ For Field Evaluation?
14.	Does product meet requirements of following specifications? (Give Specification No.)
	AASHTO ASTM Fed. Spec. KY Others
15.	Has product, or is product being evaluated by other Highway authorities or other agencies? (State by Whom)
	ODOT
16.	Is product approved for use by other highway authorities or other agencies? (State by whom used and whether use is routine or experimental only and attach documentation (if available.)
	ODOT, ALSO ENDORSED BY CASTING MANUFACTURER
17.	Has another office of the Kentucky Department of Highways been contacted? YesNo
	Which office?	When?

18.	Product web page:

	* Required Fields

Product Submitter's Information:
Name: *
Filling Date: Mon, 11 Jan 2016 14:19:59 -0500
Organization: P3 INFRASTRUCTURE, INC.
Address: 671 MCCAULEY RD., STOW, OH 44224
Telephone Number: 3304089502
Email Address:


Generic Name: EPOXY ADHESIVE FOR RPM CASTINGS
This product is Not Patented

Manufacturer: P3 INFRASTRUCTURE, INC.
Address: 2146 ENTERPRISE PARKWAY
	TWINSBURG, OHIO 44087

Background description of company and its products:
	P3 is an innovative technology company that creates and manufactures coatings and adhesive polymer solutions. Our core philosophy at P3 is to utilize these durable, environmentally safe and proven applications to improve existing and new infrastructure co
Recommended Uses-Primary: Adhesive
Recommended Uses-Alternate: Miscellaneous
Outstanding Features or Advantages Claimed:
	âˆ™Solvent free âˆ™100 percent solids âˆ™Resistant to chemicals âˆ™Excellent adhesion to concrete and asphalt âˆ™Rapid return to service
General Composition of Material:
	EPOXY RESIN AND AMINE BASED HARDENER (CATALYST)
Date introduced on Market: 2015-02-01
Alternate for Following Existing Product: BITUMINOUS ADHESIVES
Cost Per Unit Material (F.O.B.): $22.50
Royalty Cost: $0.00
Cost Per Unit in Place: $0.00

Material Specifications Furnished by Manufacturer? To Be Mailed
Product Availability: Non-Seasonal , Delivery at Site Within 14 Days after Receipt of Order
Can Samples Be Provided? No. Samples can not be provided
At Cost $0.00 for Laboratory Testing
At Cost $0.00 for Field Testing

This product meets requirements of following specifications:
	AASHTO: M237 ASTM: Fed. Spec.: KY: Others:
This product has/is being evaluated by following Highway authorities or agencies:
	ODOT
This product is approved for use by other highway authorities or other agencies:
	ODOT, ALSO ENDORSED BY CASTING MANUFACTURER
Another office of the Kentucky Department of Highways has been contacted.
	Contacted Office: Contact Date:

Product Web Page: http://www.p3-i.com/duradhesive

This information is filed by PUNEET SINGH on Jan 11, 2016
Contact Information:
	P3 INFRASTRUCTURE, INC.
	671 MCCAULEY RD.
	STOW, OH 44224
	Phone: 3304089502
	Email: PUNEET@P3-I.COM


Select the attachment you wish to open and click on it. If a window appears asking DO YOU WANT TO SAVE THIS FILE? that means you must save the file to your hard drive and then open it from your hard drive. We apologize for the inconvenience.


Copyright© 2024 Kentucky Transportation Cabinet. All rights reserved. APEL \| Kentucky Transportation Cabinet \| Kentucky Transportation Center \| Contact Us